Poulan 530164833 instruction manual Installing Attachment Hanger, Operating Position, Edging

Page 7

INSTALLING ATTACHMENT HANGER

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

1.Remove the shaft cap from the attachment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Keep right arm slightly bent with right hand

holding the trigger handle of powerhead. S Keep left arm extended with left hand hold-

ing the handlebar.

S Keep unit below waist level.

S Adjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug (or disconnect powerhead from power source) before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace. Conditions such as depth of cut and material being cut will regu- late the speed and time required for your edg- ing job.

SAllow the engine to warm up before you begin edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en- gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable

plants. The high speed metal blade may cut roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, move the powerhead ON/OFF switch to the OFF position, disconnect the spark plug (or disconnect powerhead from power source), and make sure the blade has completely stopped turning before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position.

S Raising the wheel will increase the cut- ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 22/04 PP1000ESafety Rules Identification of SymbolsOperator Safety Fastened Maintain unit according to recommended pro Cedures UNIT/MAINTENANCE SafetyInto water, return it to your authorized service for repair Rized service dealerTransporting and Storage Edging SafetyHandlebar Assembly AssemblyTools Required Know Your Edger Attachment Blade Depth Adjustment KnobInstalling Attachment OperationEdging Installing Attachment HangerSetting the Edging Depth Operating PositionService and Adjustments MaintenanceSeasonal Storage Limited WarrantyLightly oil external metal surfaces

530164833 specifications

The Poulan 530164833 is a highly efficient and powerful replacement chain designed for various Poulan chainsaws and similar models. Known for its remarkable durability and performance, this chain is particularly favored by both professional users and DIY enthusiasts who demand quality and efficiency in their cutting tools.

One of the main features of the Poulan 530164833 chain is its construction from high-quality materials that ensure resilience and longevity. The chain is made from durable steel, which not only provides strength but also contributes to extended wear resistance. This is essential for users who frequently engage in heavy-duty cutting tasks, as it maintains its sharpness and performance over time.

Moreover, the Poulan 530164833 incorporates advanced cutting technologies. It features meticulously designed cutting teeth that facilitate smoother and faster cutting. These teeth are precision-ground, which allows for improved cutting efficiency, reducing the effort required to saw through wood and other materials. This feature significantly enhances the overall experience, especially for those who rely on their chainsaws for extensive periods.

Another notable characteristic is the chain's compatibility with a variety of Poulan chainsaw models, making it a versatile option for users with different machines. Whether you are performing routine maintenance or tackling substantial lumber cutting tasks, this chain offers reliable performance across various applications.

In addition to its robust construction and impeccable cutting capabilities, the Poulan 530164833 is designed for easy installation. Users can quickly replace the existing chain on their chainsaws without needing specialized tools or extensive technical knowledge. This user-friendly aspect makes it an appealing choice for the average consumer who values convenience.

Additionally, the design of the Poulan 530164833 supports effective lubrication, minimizing friction and heat buildup during operation. This feature not only prolongs the life of the chain but also enhances safety by reducing the risk of overheating.

In summary, the Poulan 530164833 is a standout choice for anyone in need of a reliable and efficient chainsaw chain. With its durable construction, advanced cutting technology, compatibility with various models, ease of installation, and effective lubrication support, it exemplifies the quality and performance that Poulan is known for in the cutting tools market. Whether for professional landscaping or home improvement projects, this chain delivers exceptional results.
Top Page Image Contents