Poulan 952711894 Manual Line Feed Button, Need to press the manual line feed button again, Latch

Page 8

Manual Line

Feed Button

SWhen the required amount of line is fed out, gently pull on the second line (there is no

need to press the manual line feed button again).

SIf the line extends past the line limiter blade, too much line has been fed out. If too much line is fed out, remove the spool cap and click spool counterclockwise until the line is at the desired length.

To remove spool cap:

1.Press and hold in the two cap release latches.

2.Pull cap away from the hub.

 

Cap

 

Cap

Spool

release

latch

 

Hub

Eyelet

TRIMMING

Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an an- gle. Allow only the tip of the line to make con- tact. Do not force trimmer line into work area.

Trimming

3 in. (8 cm) above ground

SCALPING

The scalping technique removes unwanted vegetation down to the ground. Hold the bot- tom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

Scalping

MOWING

Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and dam- age the tool.

Mowing

To reinstall spool cap:

1.Keep all areas of the cap and hub clean. Failure to do so may prevent the cap be- ing securely located in the hub.

2.Replace the cap, pressing firmly down to- wards the hub to ensure cap is fully se- cured.

3.Check that the cap is secure by trying to remove it without pressing the two latches.

WARNING: Use only 0.065 inch (1.65

mm)diameter line. Other sizes of line will not ad- vance properly and will result in improper cutting head function or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause se- rious injury. See page 3 for warning concerning other cutting devices.

SWEEPING

The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

8

Image 8
Contents Advertencia AvertissementIdentification of Safety Symbols Safety Rules Safety Information On the UnitOperator Safety Electrical SafetyUnit Safety Cutting SafetyAssembly Operation Operating Instructions Attach the Extension Cord to Your TrimmerCorrect Operating Position Automatic Line Feed SystemManual Line Feed Button Need to press the manual line feed button againLatch Hub EyeletMaintenance Service and AdjustmentsBefore Each USE After Each USECut out Area of spool Eyelet User Replaceable Service PartsReinstall the spool cap Troubleshooting Table Cause Remedy Limited Warranty Canada, contact

545186764, 952711894 specifications

The Poulan 952711894, 545186764 represents a significant advancement in outdoor power equipment, specifically designed for efficient lawn care. This robust trimmer head is engineered to handle the rigors of demanding cutting tasks, making it an essential tool for both homeowners and professionals alike.

One of the standout features of the Poulan 952711894, 545186764 is its compatibility with a wide range of Poulan Pro and other compatible brands. This versatility ensures that users can utilize it within their existing toolset seamlessly without needing to invest in new equipment. The trimmer head is designed to fit various models, enhancing its usability across different yard care tasks.

A notable technological innovation in this trimmer head is its rapid loading system, which simplifies the process of reloading the trimmer line. This feature saves time and frustration, allowing users to focus on the task at hand rather than struggling with complicated line feed mechanisms. The easy-to-use design ensures that even amateurs can quickly make necessary adjustments, thereby boosting efficiency in the field.

Additionally, the Poulan 952711894, 545186764 is equipped with a dual-line capability, which allows for a more efficient cutting performance. The dual-line system enhances productivity by providing a wider cutting path. As a result, users can complete their tasks more quickly and effectively, whether trimming grass around flower beds or tackling more robust weeds.

Durability is another key characteristic of this trimmer head. Constructed with high-quality materials, it is designed to withstand the wear and tear associated with outdoor use. This robustness prevents premature failures, ensuring users can rely on their equipment season after season. The trimmer head's design minimizes vibrations, which enhances user comfort during extended use, making it an ergonomic choice for lawn maintenance.

In terms of maintenance, the Poulan 952711894, 545186764 requires minimal upkeep, which is crucial for users who demand high performance without frequent interruptions. The simplicity of its construction aids in quick assessments for wear and repairs, making it user-friendly for anyone looking to maintain their outdoor equipment effectively.

Overall, the Poulan 952711894, 545186764 encapsulates an effective blend of innovation, user-friendliness, durability, and versatility, making it a valuable addition to any lawn care toolkit. Its thoughtful design caters to both casual users and experienced professionals, ensuring that everyone can achieve a well-manicured lawn with ease.