Poulan 952711825, 545167665 UNIT/MAINTENANCE Safety, Edging Safety, Transporting and Storage

Page 4

S Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for the powerhead. Re- ceptacles are available having built-in GFCI protection and may be used for this measure of safety.

UNIT/MAINTENANCE SAFETY

WARNING: Disconnect powerhead spark plug (or disconnect powerhead from power source) before performing mainte- nance.

SInspect entire unit before each use. Replace damaged parts. Check for fuel leaks. Make

sure all fasteners are in place and securely fastened.

SMaintain unit according to recommended pro-

cedures.

S Throw away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit.

SUse only recommended Poulan PRO parts

and accessories. Never use wire, wire rope, string, flailing devices, etc.

SBe sure blade stops turning when engine idles (see CARBURETOR ADJUST-

MENTS section of powerhead manual).

SRemove the blade before making carburetor adjustments. Hold the unit by hand. Do not

make carburetor adjustments from the blade side of the unit.

SKeep others away when making carburetor adjustments.

SNever start the unit with the clutch housing re- moved. The clutch can fly off and cause seri-

ous injury.

SHave all maintenance and service not ex-

plained in this manual performed by an autho- rized service dealer.

SIf blade strikes a foreign object, follow these steps: stop unit and disconnect spark plug wire (or disconnect from power source), in- spect for damage, and repair any damage be- fore resuming operation of the unit.

EDGING SAFETY

WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by the blade or can wrap around the shaft.

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me- ters) away. Stop the unit immediately if you

are approached.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over-

reach or stand on unstable surfaces.

S Always keep the wheel in contact with the ground.

SKeep all parts of your body away from the

blade and muffler.

SAlways push the unit slowly over the ground.

Stay alert for uneven sidewalks, holes in the terrain, large roots, etc.

SDo not force the unit. Use only for jobs ex- plained in this manual. Use only for edging. Do not abuse unit. Do not use in rain or wet

locations.

STo reduce the risk of fire, do not allow exces- sive grass, leaves, or grease to accumulate on the attachment.

S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging.

SNever operate without blade shield in place and in good working order.

TRANSPORTING AND STORAGE

SDo not grasp or hold exposed blade.

SStop powerhead before leaving work area. S Allow powerhead and gearbox to cool before

storing or transporting it in a vehicle.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from wa- ter heaters, electric motors or switches, fur- naces, etc.

S Store attachment so blade cannot accidental- ly cause injury.

S Store attachment indoors, out of reach of children.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1-800-554-6723.

SPECIAL NOTICE: Exposure to vibra- tions through prolonged use of gasoline pow- ered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek med- ical attention. An anti-vibration system does not guarantee the avoidance of these prob- lems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this unit.

SAVE THESE INSTRUCTIONS

4

Image 4
Contents Manual de Instrucciones Manuel d’Instructions Safety Rules Identification of Safety SymbolsOperator Safety Do not smoke or allow smoking near fuel or the powerhead Never touch the switch when connect- ing extension cordIng accessories and/or attachments Keep handles free of oil and fuelEdging Safety UNIT/MAINTENANCE SafetyTransporting and Storage Blade Depth Adjustment Knob Installing AttachmentOperation Know Your Edger AttachmentInstalling Attachment Hanger Setting the Edging DepthOperating Position EdgingMaintenance Service and AdjustmentsLimited Warranty Seasonal StorageLightly oil external metal surfaces Statesville Road