Poulan 530163413 instruction manual Operator Safety, Unit / Maintenance Safety, Fuel Safety

Page 2

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instruc- tions.

This power unit can be dangerous! Operator is

responsible for following instructions and warn- ings on unit and in manual. Read entire instruc- tion manual before using unit! Be thoroughly fa- miliar with the controls and the proper use of the unit. Restrict the use of this unit to persons who have read, understand, and will follow the instructions and warnings on the unit and in the manual. Never allow children to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades or flail- ing devices. This unit is designed for line trim- mer use only. Use of any other accessories or attachments will increase the risk of injury.

WARNING: Trimmer line throws ob- jects violently. You and others can be blinded/in- jured. Wear eye and leg protection. Keep body parts clear of rotating line.

Eye Protection

 

 

 

 

 

Hazard Zone

 

 

50 ft.

 

 

Boots

(15 m)

 

Keep children, bystanders, and animals 50 feet (15 meters) away. Stop unit immediately if ap- proached.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1--800--554--6723.

OPERATOR SAFETY

S Dress properly. Always wear safety glasses or similar eye protection when op- erating, or performing maintenance, on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation

is dusty.

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.

2

S Always wear foot protection. Do not go barefoot or wear sandals. Stay clear of spinning line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

SBeing fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

S Stay Alert. Do not operate this unit when you are tired, ill, upset or under the influ- ence of alcohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

SNever start or run inside a closed room or

building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

SDisconnect the spark plug before perform- ing maintenance except carburetor adjust-

ments.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 0.080! (2 mm) diameter Poulan PRObrand replacement line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

S Make sure unit is assembled correctly as shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contact- ing any object.

SKeep others away when making carburetor

adjustments.

SUse only recommended Poulan PROr ac- cessories and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by an au- thorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills.

S Move at least 10 feet (3 meters) away from fueling site before starting engine.

S Stop engine and allow to cool before re- moving fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Fuel Safety Operator SafetyUnit / Maintenance Safety Eye Protection Hazard ZoneTransporting and Storage Cutting SafetyAdjusting the Handle Attaching ShieldKnow Your Trimmer ON/STOP SwitchHOW to Stop Your Unit Primer BulbStarting a Flooded Engine HOW to Start Your UnitStarting a Warm Engine Cut from your left to your right Operating Position Cutting MethodsTrimmer Line Advance Check for Loose Fasteners and Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Damaged or Worn PartsReplacing the Line Carburetor AdjustmentReplace Spark Plug Replacing the Cutting HeadEngine Seasonal StorageFuel System OtherTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC

530163413 specifications

The Poulan 530163413 is a highly regarded replacement part designed specifically for Poulan chainsaws and outdoor power equipment. This particular component is a magneto ignition coil, an essential element that plays a crucial role in the starting and performance of small engines.

One of the standout features of the Poulan 530163413 is its reliability. The ignition coil is engineered to create a spark that ignites the fuel-air mixture in the engine's cylinder. A strong, consistent spark is vital for ensuring the chainsaw operates smoothly and efficiently, allowing users to tackle tough tasks without interruptions. This part is built to meet or exceed OEM specifications, guaranteeing optimal performance and durability.

In terms of technology, the Poulan 530163413 utilizes advanced materials that enhance its longevity and resistance to wear and tear. Given that outdoor power equipment often operates in rugged conditions, the coil is designed to withstand various environmental factors, including heat and vibration. This durability ensures that users can rely on their tools over a prolonged period, reducing the need for frequent replacements.

Another notable characteristic of the ignition coil is its compatibility. The Poulan 530163413 is designed to fit a wide range of Poulan chainsaw models, making it a versatile choice for both professionals and DIY enthusiasts. Users can quickly identify this part as the solution to ignition issues often caused by a faulty ignition coil, thereby restoring functionality and efficiency to their equipment.

Installation is user-friendly, as the Poulan 530163413 generally comes with all necessary mounting hardware, making it accessible for those looking to carry out repairs without professional assistance. This aspect empowers users to maintain and service their chainsaws, which can lead to long-term savings and improved performance.

In summary, the Poulan 530163413 ignition coil is a robust and reliable component that enhances the functionality of Poulan chainsaws. With its high-quality materials, compatibility with various models, and ease of installation, it is an ideal choice for anyone needing to replace a faulty ignition coil. As a critical part of the engine’s ignition system, it ensures that users can enjoy a powerful and efficient chainsaw experience.