Starting a Flooded Engine, Clean AIR Filter

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position and the choke lever in the OFF CHOKE position and engaging the throttle lock as directed in the STARTING A COLD ENGINE section; then, pull the rope to clear the engine of excess fuel. Starting could require pulling the starter rope many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to the TROUBLESHOOTING TABLE or call 1-800-554-6723.

WARNING: Ensure ON/OFF switch is in the OFF position and disconnect the spark plug before performing maintenance except for carburetor adjustments.

GENERAL RECOMMENDATIONS

Thewarranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Do not use unit if fuel tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND LABELS

SBefore and after each use, inspect com- plete unit for loose or damaged parts. After

each use, clean the unit and labels using a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

Air Filter

Cover

Air Filter

Screw

Cleaning the air filter:

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

SClean the cover and the area around it to keep debris from falling into the carburetor

chamber when the cover is removed.

SRemove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

SWash the filter in soap and water. S Allow filter to dry.

S Add a few drops of oil to the filter; squeeze filter to distribute oil.

S Replace parts.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The blade will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. When making adjust- ments, use a screwdriver short enough to keep your hands behind the handguard and away from the blade. After making adjust- ments, the blade must not move at idle speed. The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

SEngine will not idle when the throttle is re- leased.

SThe blade moves at idle. Keep others away when making idle speed adjustments.

Make adjustments with the unit resting on a level surface free of debris that can be caught in the hedge trimmer blade. Serious injury to the operator and others can occur if the car- buretor is not properly adjusted. Keep all parts of your body away from the blade and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without blade moving (idle too fast) or en- gine stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speedif engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if the blade moves at idle.

-- 6 --

GHT 180 LE, GHT 220 LE specifications

The Poulan GHT 220 LE and GHT 180 LE are powerful, reliable hedge trimmers designed for home gardeners and professionals alike, blending ease of use with superior performance. These models from Poulan's reputable line of outdoor power equipment are built to tackle a wide range of trimming tasks, making them valuable tools in the landscape maintenance arsenal.

Starting with the GHT 220 LE, it boasts a robust 22-inch double-sided blade that efficiently cuts through thick shrubs and hedges. The dual-action blade design minimizes vibrations and provides a smoother cutting action, resulting in a cleaner finish with less effort. Its ergonomic handle, coupled with lightweight design, ensures comfortable operation over extended periods, reducing fatigue and increasing productivity. The GHT 220 LE is equipped with a 20V lithium-ion battery, offering ample power and extended run-time, which means fewer interruptions during your landscaping jobs.

On the other hand, the Poulan GHT 180 LE is ideal for homeowners seeking a more compact yet effective tool. With an 18-inch blade length, it strikes a perfect balance between portability and cutting capability. The GHT 180 LE also features a dual-action cutting blade, which ensures precise and clean cuts while minimizing vibration. It operates on a user-friendly 18V battery, making it effortless to handle without being tethered to a power source.

Both models are equipped with several innovative features aimed at enhancing user experience. The soft-grip handle design allows for better control and comfort, especially for prolonged use. They also come with built-in safety features, including blade guards and a safety switch, ensuring that accidental starts are prevented. Their lightweight and balanced construction helps maneuver the hedge trimmers easily, even in tight spaces or awkward angles.

In terms of technology, Poulan emphasizes efficiency and performance. The brushless motor technology in these models means less maintenance over time while offering a longer lifespan compared to traditional motors. Additionally, the battery life indicator is a particularly useful feature, allowing users to monitor battery levels clearly and plan their tasks accordingly.

In conclusion, both the Poulan GHT 220 LE and GHT 180 LE hedge trimmers embody the perfect combination of power, technology, and user-friendly design. Whether you are a casual homeowner or a seasoned landscaper, these tools are designed to make hedge trimming a straightforward and enjoyable task.