Poulan PP136 HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine

Page 9

ON/OFF Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

5.Squeeze the throttle trigger fully and hold through all remaining steps.

6.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see following illustra- tion).

Choke position decal

8.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to OFF CHOKE by aligning lever with posi- tion shown on decal (see illustration be- low). Allow the unit to run for 30 more se- conds at OFF CHOKE before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

Choke position decal

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

4.Pull starter ropesharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could requirepulling the starter handle many times depending on how badly the unit is flooded.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 530164077 12/30/03 Manual de Instrucciones Manuel d’InstructionsBoots Operator SafetyPP136 Eye ProtectionFuel Safety Unit / Maintenance SafetyLine Trimmer Safety Transporting and StorageBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Always use the handlebar when using edg- er attachmentHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Proboscis noseSnow Thrower Safety Installing Trimmer ATTACH- Ment Adjusting the HandleAttaching Shield HOW to Stop Your Unit ON/OFF Switch ChokeKnow Your Trimmer Primer BulbHOW to Start Your Unit Starting a Warm EngineStarting a Flooded Engine Operating the Coupler Installing Optional ATTACH- MentsOperating Position Trimmer Line AdvanceCutting Methods RightWrongTrimming Clean AIR Filter Inspect and Clean Unit and LA- BelsCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsReplacing the Cutting Head Carburetor AdjustmentSeasonal Storage Fuel SystemTroubleshooting Table Engine OtherTrouble Cause Remedy Home PRODUCTS, INC., for this tool. Addi Policy of Electrolux Home ProdTions The U.S. Environmental Protection Intermediate 125 hours Extended 300 hours

PP136 specifications

The Poulan PP136 is a versatile and efficient chainsaw designed for both homeowners and professionals looking for a reliable tool for various cutting tasks. With its lightweight design and powerful performance, the PP136 stands out as an excellent choice for those who need a dependable chainsaw for trimming, pruning, and even cutting firewood.

One of the standout features of the Poulan PP136 is its 36cc engine, which provides ample power to tackle a variety of cutting jobs. The engine is designed to deliver optimal performance while maintaining fuel efficiency, making it an economical choice for regular use. The chainsaw is equipped with a 16-inch bar and chain, allowing users to cut through larger branches and logs with ease. The size strikes a perfect balance between maneuverability and cutting capacity, making it suitable for both light and moderate tasks.

The Poulan PP136 also incorporates several advanced technologies for enhanced user experience. It features an adjustable automatic oiler that ensures consistent lubrication to the chain, reducing wear and tear while maximizing the lifespan of the chain and bar. Another notable technology is the easy-start system, which minimizes the effort required to start the engine, enabling users to get to work quickly without the frustration of traditional starting mechanisms.

Safety is a top priority in chainsaw design, and the PP136 is no exception. It comes equipped with a chain brake that instantly stops the chain in case of kickback, reducing the risk of accidents. The cushioned handle reduces vibration during operation, providing increased comfort and improving control while cutting. This focus on safety and comfort makes the PP136 suitable for users of all skill levels.

Additionally, the chainsaw features a tool-less air filter cover, allowing for easy access and maintenance, which is critical for the longevity of the tool. The lightweight design of the chainsaw ensures that users can handle it with minimal fatigue, making it an ideal choice for longer cutting sessions.

Overall, the Poulan PP136 combines power, efficiency, and safety in a user-friendly package, making it a reliable tool for anyone in need of a practical chainsaw solution. Whether you are a seasoned professional or an occasional user, the PP136 provides the performance and reliability required for a wide range of cutting tasks.
Top Page Image Contents