Poulan PP136E Replacing the Cutting Head, Carburetor Adjustment, Remove the screwdriver

Page 13

Guide Slot

Guide

Slot

9.Insert the ends of the lines through exit holes in the sides of the cover.

10.Place the spool in the cover.

Spool

Cover

11.Make sure the lines are not caught be- tween the rim of the spool and the wall of the cover.

12.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head, blade or any optional attachment will be spinning during most of this procedure. Wear your protective equipment and observe all safe- ty precautions. After making adjustments, the trimmer head, blade or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

S The trimmer head, blade or optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head, blade or optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head, blade or optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

Air Filter Cover

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an

authorized

service dealer or call

1--

800--

554--

6723.

13

Image 13
Contents PP136E Operator Safety Safety RulesUL Classified Product Notice Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Hedge Trimmer Safety Cultivator SafetyPole Pruner Safety Proboscis noseHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly Keep the rotor clear of debrisInstalling Trimmer ATTACH- Ment AssemblyAdjusting the Handle Attaching the ShieldOperation Installing Optional ATTACH- Ments HOW to Start Your UnitStarting a Cold Engine Starting a Warm EngineTrimmer Line Advance Operating PositionCutting Methods Hearing ProtectionCheck for Loose Fasteners and Parts MaintenanceCheck for Damaged or Worn Parts Service and Adjustments Authorized Service dealer or call Carburetor AdjustmentReplacing the Cutting Head Remove the screwdriverFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyPlacement and Repair of Emission

PP136E specifications

The Poulan PP136E is a powerful and reliable chainsaw designed for both professional and household users. This saw is particularly suitable for light to medium cutting tasks, such as trimming trees, cutting firewood, and handling various outdoor chores. It boasts a combination of user-friendly features and advanced technology, making it an ideal choice for anyone looking for an efficient and effective chainsaw.

One of the standout features of the Poulan PP136E is its engine. Powered by a robust 36cc two-cycle engine, it delivers impressive performance while maintaining a lightweight design. This means users can maneuver the chainsaw with ease, reducing fatigue during extended use. The engine is designed with a strong focus on fuel efficiency, allowing for longer run times between refueling.

The chainsaw is equipped with a 16-inch bar and chain, providing a balance between cutting capability and control. This length is versatile enough for various applications without becoming cumbersome. The chain itself is designed for quick adjustments, allowing users to maintain optimal tension for safe and effective cutting.

Another notable feature is the tool-less chain tensioning system, which simplifies the process of adjusting the chain's tension. This is particularly beneficial for users who need to make frequent adjustments on the job. Furthermore, the Poulan PP136E incorporates an automatic oiler, ensuring the chain and bar are lubricated during operation. This not only extends the life of the saw but also enhances cutting performance.

The design of the Poulan PP136E also emphasizes user comfort and safety. It features a reliable safety switch, ensuring that the chainsaw won't accidentally start. The ergonomic handle provides a comfortable grip, allowing users to operate the saw for longer periods without experiencing discomfort.

The lightweight design, combined with technological advancements like anti-vibration handles, minimizes user fatigue. This makes the PP136E a great choice for both seasoned professionals and those new to chainsaw operations.

In conclusion, the Poulan PP136E is a well-rounded chainsaw that combines performance, efficiency, and user-friendly features. Whether you are tackling yard work or professional cutting tasks, this chainsaw offers the reliability and power you need. Its blend of innovative technology and thoughtful design makes it a worthwhile investment for anyone looking to enhance their outdoor maintenance arsenal.