Operation

KNOW YOUR UNIT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

		Assist handle
	Coupler
	Shaft		ON/STOP switch
Trimmer head		Primer bulb	Starter handle
		Primer bulb	Starter handle
	Shield
Line limiter
blade	Throttle	Start	Muffler
	trigger	lever

ON/STOP SWITCH

The ON/STOP switch is used to stop engine. To stop the engine, push and release the engine ON/STOP switch.

PRIMER BULB

The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.

START LEVER

The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to warm--up 10--15 seconds, then fully squeeze the throttle trigger to deactivate the starting system (start le- ver returns to RUN position).

COUPLER

The COUPLER enables optional attach- ments to be installed on the unit.

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air- cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ra- tio of 40:1. A 40:1 ratio is obtained by mixing 3.2

fluid ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or marine oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gaso- line, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and

follow the safety rules relating to fuel before fuel- ing your unit.

CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major en- gine performance and durability problems.

WARNING: Alternative fuels (not gas- oline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in

115249526, 952711962 specifications

The Poulan 952711962,115249526 is a highly regarded chainsaw model known for its robust performance and advanced features that cater to both amateur and professional users. This tool is engineered for optimal efficiency in cutting, trimming, and maintaining trees, making it a popular choice among landscapers, forestry professionals, and DIY enthusiasts.

One of the standout features of the Poulan 952711962,115249526 is its powerful engine. Equipped with a high-performance 50cc engine, this chainsaw delivers impressive cutting power, allowing users to tackle a variety of tasks ranging from light pruning to heavy-duty tree felling. The engine is designed for both efficiency and durability, ensuring that it can withstand rigorous use over time.

The chainsaw also features a low-vibration design, which significantly reduces operator fatigue. This is achieved through advanced vibration dampening technology that absorbs and minimizes vibrations during operation. This feature is particularly beneficial for users who operate the chainsaw for extended periods as it enhances comfort and control.

Another important characteristic of the Poulan 952711962,115249526 is its ease of use. The tool offers an effortless pull starting mechanism that simplifies the process of starting the chainsaw, even in cold weather conditions. Additionally, the chainsaw includes an automatic oiling system that ensures the bar and chain remain adequately lubricated during use, promoting longevity and superior cutting performance.

Safety is a top priority in the design of this chainsaw. It is equipped with a chain brake that immediately stops the chain when activated, protecting users from potential kickback incidents. Additionally, the front hand guard helps to prevent accidental contact with the chain during operation.

The Poulan 952711962,115249526 features a lightweight design, making it easy to maneuver and transport. Its balanced weight distribution allows users to perform precise cuts without straining their arms or wrists. The chainsaw also includes adjustable tensioning for the chain, enabling users to easily maintain optimal performance.

In summary, the Poulan 952711962,115249526 chainsaw is a versatile and reliable tool that combines power, efficiency, and safety features. Its advanced technologies, user-friendly design, and comfortable handling make it an excellent choice for anyone looking to undertake yard work or professional landscaping tasks. Whether you're pruning branches or cutting down trees, this chainsaw is built to exceed expectations.