Carton Contents, Assembly Tools Required

operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

SLift handlebar to upright position. Handlebar

CARTON CONTENTS

Check carton contents for the following:

Sbrushcutter

Sblade shield screws (4) S cupped washer

S large nut for installing blade S long hex wrench

S metal shield S plastic shield

S shoulder strap with warning S weed blade

S trimmer head (assembled on unit) S handlebar (assembled on unit)

S container of oil

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

ASSEMBLY

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: Make sure your unit is properly assembled and all fasteners are se- cure.

TOOLS REQUIRED

SHex wrench (provided) S Adjustable wrench

S Phillips screwdriver

ADJUST AND SECURE THE HAN- DLEBAR

DANGER: During blade usage, the barrier portion of the handlebar must be ad- justed and remain installed as shown to pro- vide a barrier between operator and the spin- ning blade. The handlebar clamp must be positioned between the arrows on the handle- bar decal.

S Rotate handlebar/clamp counterclockwise toward engine until clamp falls into groove of clamp base.

Handlebar

Clamp

Knob

Clamp

Base

SPlace the handlebar in a comfortable oper- ating position.

SRetighten handlebar by turning clamp knob clockwise until handlebar is secure and sta- tionary in clamp base (clamp knob can not be overtightened).

ASSEMBLY OF SHOULDER STRAP

WARNING: Proper shoulder strap and handlebar adjustments before starting the engine are required.

STry on shoulder strap and adjust for fit and

balance before starting the engine or begin- ning a cutting operation.

SInsert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

S Adjust the strap, allowing the hook to be about 6 inches below the waist.

SFasten the strap hook to the clamp located between the trigger handle and the handle- bar clamp base and lift the tool to the oper- ating position.

CONFIGURING YOUR UNIT

You can configure your unit using a cutting head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1/2 inch in diameter. To assemble your unit, go to the section for the desired configuration and follow the instructions.

331 specifications

The Poulan 331 is a versatile chainsaw that has become a popular choice among both casual users and professional arborists due to its reliable performance and user-friendly features. This model strikes a balance between power and convenience, making it suitable for a variety of cutting tasks, from tree trimming to firewood chopping.

One of the main features of the Poulan 331 is its lightweight design, which enhances maneuverability. Weighing in at just around 10-12 pounds, it allows users to handle the saw with ease, reducing fatigue during long periods of operation. This makes it an excellent choice for individuals who may not have extensive experience in using chainsaws or those who need a tool for extended use.

Powering the Poulan 331 is a robust 33cc 2-cycle engine, providing ample power for its size. This engine is designed to deliver a high cutting speed, making it efficient for various tasks such as pruning and cutting down small to medium-sized trees. The engine features an easy-start system that reduces the effort needed to start the chainsaw, making it an ideal choice for users who may struggle with traditional starting methods.

The Poulan 331 also incorporates advanced technological features that enhance its performance and safety. A high-performance air filtration system helps keep the engine free from debris, prolonging its life and ensuring consistent power output. Additionally, the automatic oiler keeps the chain lubricated during operation, which not only enhances cutting performance but also reduces wear and tear on the chain.

Safety is a significant concern when operating chainsaws, and the Poulan 331 addresses this with features such as a chain brake and a protective front handguard. The chain brake can stop the chain quickly in the event of kickback, providing an added layer of safety for the user.

Furthermore, the chainsaw's ergonomic handle is designed to provide a comfortable grip, reducing vibrations and enhancing control during use. This feature, combined with the lightweight design, makes the Poulan 331 an accessible tool for a wide range of users.

In summary, the Poulan 331 is a powerful and lightweight chainsaw that combines user-friendly features with advanced technology. Its reliable performance, efficient engine, and safety features make it a preferred choice for both novices and seasoned professionals. Whether for home use or professional applications, the Poulan 331 stands out as a dependable tool in the world of cutting equipment.