HOW to Start Your Unit, Starting a Warm Engine

SIf engine does not stop, move choke lever to FULL CHOKE position.

ON/STOP Switch

Throttle Trigger

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

4.Squeeze the throttle trigger fully and hold through all remaining steps.

5.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see following illustra- tion).

Choke position decal

7.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 seconds, then move the choke lever to OFF CHOKE by aligning lever with posi- tion shown on decal (see illustration be- low). Allow the unit to run for 30 more se- conds at OFF CHOKE before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

Choke position decal

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 5 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull start- er rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

131 specifications

The Poulan 131 is a robust and versatile chainsaw designed for both home users and professionals alike. It combines power, performance, and user-friendly features, making it an ideal tool for a variety of cutting tasks. One of the standout characteristics of the Poulan 131 is its powerful engine. Equipped with a 33cc two-stroke engine, this chainsaw is capable of delivering impressive performance, enabling it to handle demanding tasks, such as felling trees, trimming limbs, and cutting firewood.

A hallmark of the Poulan 131 is its efficient fuel system. Utilizing a unique fuel and oil mixture, the chainsaw promotes reduced emissions while maximizing power output. This feature not only makes it environmentally friendly but also ensures longevity and performance consistency, leading to less frequent maintenance.

For ease of use, the Poulan 131 incorporates an automatic oiler system that lubricates the bar and chain during operation, reducing friction and wear. This feature is crucial for maintaining the efficiency of the saw while also enhancing the life of the bar and chain. The chainsaw is also equipped with an adjustable chain tension system, allowing users to quickly adjust the chain as it stretches over time.

Safety is another significant aspect of the Poulan 131. It comes with a chain brake that allows for immediate stopping of the chain in case of kickback, providing users with confidence as they operate the machine. Additionally, the chainsaw features a comfortable grip handle designed to minimize vibrations, allowing for prolonged use without discomfort.

Weighing in at a manageable weight, the Poulan 131 is easy to maneuver, making it suitable for both novices and experienced users alike. Its compact design aids in cutting accuracy and control, which is essential when performing delicate tasks or working in tight spaces.

Moreover, the Poulan 131 is designed for easy starting, featuring a reliable starting system that reduces the effort required to fire up the engine. This feature is particularly beneficial, especially in colder weather conditions, where starting issues can often be a nuisance.

In conclusion, the Poulan 131 is a well-rounded chainsaw that embodies the perfect blend of power, safety, and user-friendly features. It is an excellent choice for anyone looking for a reliable tool capable of handling various cutting tasks with ease and efficiency. Whether you are a casual user or a professional, the Poulan 131 stands out as a dependable option in the chainsaw market.