Hayter Mowers 407F manual Start the Engine, Trimmer Tips

Page 13

OPERATION

START THE ENGINE

NOTE: If engine fails to start after three

NOTE: DO NOT BE ALARMED, your engine

pulls, push the primer button two times and

again pull the recoil starter handle.

will smoke the first time it is started. It is

WARNING: Never run the engine

burning off the protective coating that is on

the internal engine parts.

indoors or in a poorly ventilated

WARNING: Never leave the ma-

area. Engine exhaust contains

carbon monoxide, an odorless

chine unattended while the en-

and deadly gas. Keep hands,

gine is running. Wait for the trim-

feet, hair and loose clothing

mer lines to stop rotation.

away from the machine and any

1. Before each use, remove debris from the

moving parts on the engine.

Avoid the muffler and surround-

debris screen shown in Figure 5. Debris

ing areas. Temperatures may ex-

can cause the engine to overheat. Wipe

ceed 150 F.

the debris screen with a cloth or paper

 

towel.

 

2. Move the throttle control lever forward to

 

the START or FAST position.

 

3. To start a cold engine, push the primer but-

 

ton five times. Wait two seconds between

 

each push of the primer button.

 

NOTE: Do not use the primer to start a

 

warm engine.

 

4. Firmly hold the recoil starter handle with

 

your right hand. See Figure 9.

 

5. Pull back sharply on the recoil starter

 

handle. DO NOT allow the starter rope to

Recoil Starter Handle

snap back. Let the starter rope slowly re-

Figure 9

wind as you hold the recoil starter handle.

 

TRIMMER TIPS

WARNING: Debris such as sticks, gravel or stones, can be thrown with sufficient force to cause per- sonal injury or property damage.

Set the throttle control in the FAST posi- tion. If the weeds or grass are tall and thick, operate the machine at a slower walking speed.

Frequently clean the underside of the ma- chine to remove any grass build up.

For best results and longer lasting line, use the ends of the line to do the cutting. This is easily done by moving slowly through very thick or heavy weeds.

If the trimmer lines become too short, it will

take longer to complete the job. If the trim- mer lines are worn to less than half their original length, change to a new trimmer line. “See How To Change The Trimmer Line” in the Maintenance section.

Do not trim on excessively steep slopes. If a slope is difficult to stand on, do not trim. Do not trim on slopes when the ground is slippery or wet. Trim across the face of a slope, not up and down.

Trimming may be done at slower engine speeds especially when trimming around flowers, shrubs, and small trees. Operat- ing at slower speeds will also reduce en- gine noise and vibration at the upper handle.

1739579

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 407F 310000001 Issue 10/2009 PowertrimTable of Contents Hayter Limited Limited WarrantySafety Precautions Operator SafetyResponsibility Of The Owner General OperationII. Slope Operation IV. ServiceIII. Children Operator Safety Control And Operating Pictorials Safety Warning PictorialsSlow Oil Fast Fuel Engine Stop Engage Disengage Contents of Literature Pack AssemblyRemove the Trimmer From Carton Attach the Guard Raise the HandleEngine Preparation ChecklistFill Crankcase With Oil Fill Fuel Tank With PetrolOperation Know Your PowertrimEYE Protection Stop the Trimmer HeadUSE the Throttle Control USE the Trimmer Head Drive LeverUSE the Primer Button Trimmer head drive lever forward to enTrimmer Tips Start the EngineService Records MaintenanceChange Engine Oil Lubricate the Jackshaft AssemblySpark Plug Adjust the Height HandlebarChange Trimmer Lines Service and Adjustment Proper Care of Trimmer LineStorage Replace the Drive BeltTrimmer EngineTrouble Cause Correction Troubleshooting ChartEngine does not start Engine runs poorlyEngine will not stop Engine overheatsRunning Poor trimmingDisplacement DimensionsWeight Trimmer Line LengthOrder Replacement Parts Repair Parts Handle And Wheels REF no QTY. Description Cutting Head And Shield REF no QTY Description Wrench & Fastener Size Guide Torque Specification Chart

407F specifications

The Hayter Mowers 407F stands as a prime example of engineering excellence in the world of lawn care, combining innovative technology with user-friendly features to deliver an exceptional mowing experience.

One of the standout characteristics of the 407F is its powerful engine. Equipped with a robust four-stroke engine, it provides ample torque and efficiency, ensuring that even the most demanding mowing tasks can be tackled with ease. This reliable power source not only guarantees a clean cut but also enhances the mower's longevity.

The 407F features a 17-inch cutting deck, designed to deliver precision cuts on various grass types. This size strikes a perfect balance, making it suitable for both small and medium-sized lawns. The cutting height can be easily adjusted, ranging from 25mm to 70mm, which allows users to achieve their desired grass length with minimal effort.

Equipped with a high-quality steel chassis, the 407F is designed for durability and stability. It is built to withstand the rigors of regular use while ensuring a steady operation across diverse terrains. The lightweight design further enhances maneuverability, making it easy to navigate around flower beds and other obstacles.

One of the most impressive innovations is the inclusion of Hayter's signature Vari-Speed system. This technology allows users to seamlessly adjust the mowing speed, which not only matches their walking pace but also eases the strain on the user, enabling longer periods of efficient mowing without fatigue.

The 407F also comes with a reliable grass collection system that maximizes efficiency by ensuring minimal grass clippings are left behind. The generous grass bag capacity means less time spent emptying, allowing for uninterrupted mowing sessions.

User comfort is a key focus with the 407F. Comfortable handles with an ergonomic design provide a solid grip and reduce vibration, making it more pleasant to operate. Additionally, it boasts a foldable handle that allows for compact storage and easy transport.

To sum up, the Hayter Mowers 407F is not just a traditional mower; it integrates advanced technology and thoughtful design features that cater to modern lawn care needs. With its powerful engine, versatile cutting options, durable construction, and user-focused features, it is well-suited for gardeners who demand quality and performance in their lawn maintenance equipment. The Hayter 407F truly represents a harmonious blend of tradition and innovation in landscaping.
Top Page Image Contents