Fuel Handling, Fuel safety | Jonsered BC 2125 instruction

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

WARNING! Take care when handling fuel.

!Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Gasoline

CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded gasoline/oil mixture. Leaded gasoline will destroy the catalytic converter.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certiﬁed to operate on unleaded gasoline.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use JONSERED two- stroke engine oil, which is specially formulated for our air- cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•Mixing ratio

1:50 (2%) with JONSERED two-stroke oil.

	Gasoline, litre	Two-stroke oil, litre

		2% (1:50)
		2% (1:50)

	5	0,10

	10	0,20

	15	0,30

	20	0,40

	US gallon	US ﬂ. oz.

	1	2 1/2

	2 1/2	6 1/2

	5	12 7/8

16 – English

BC 2125 specifications

The Jonsered BC 2125 is a powerful and versatile brush cutter designed for both professional landscapers and dedicated homeowners. It combines performance, durability, and user-friendly features, making it an excellent choice for tackling tough vegetation and maintaining outdoor spaces.

One of the standout features of the BC 2125 is its robust engine. Powered by a high-performance, air-cooled two-stroke engine, this brush cutter delivers an impressive combination of power and efficiency. The engine is designed to provide the necessary torque for cutting through thick brush and weeds, ensuring that users can tackle even the most challenging tasks with ease.

The BC 2125 comes equipped with an innovative Easy Start system, which significantly reduces the effort required to start the machine. This technology minimizes pull resistance, allowing users to get to work quickly without the frustration often associated with starting larger outdoor power equipment.

Safety is also a priority with the Jonsered BC 2125. It features a professional-grade harness that distributes weight evenly across the body, enhancing comfort during prolonged use. The anti-vibration system further reduces the strain on the operator, allowing for extended periods of operation without excess fatigue.

In addition to its powerful performance, the BC 2125 offers versatility through its interchangeable cutting heads. Users can opt for a variety of attachments, including grass trimmers, brush cutting blades, and even pole saws, making it suitable for a wide range of tasks. This adaptability ensures that the machine can be customized to meet specific needs, whether it's trimming grass around garden edges or clearing dense underbrush.

The design of the BC 2125 emphasizes user convenience. The adjustable handle not only improves ergonomics but also allows for precise control, particularly when navigating uneven terrain. The machine’s lightweight construction makes it easy to maneuver, reducing operator fatigue during long tasks.

In conclusion, the Jonsered BC 2125 is a reliable and efficient brush cutter that combines innovative technology and design to provide exceptional performance. With its powerful engine, Easy Start system, safety features, and versatility, this machine is ideal for anyone seeking a dependable solution for maintaining their outdoor spaces. Whether for professional or personal use, the BC 2125 is a strong contender in the realm of brush cutters, offering the reliability and functionality users expect from the Jonsered brand.