Hayter Mowers 111-1073 manual How To Lubricate, Jackshaft Assembly, How To Change Engine Oil

Page 15

MAINTENANCE

 

LUBRICATION

 

How To Lubricate

Grease Fitting

The Jackshaft Assembly

 

A grease fitting is provided to lubricate the

 

jackshaft assembly. Use a grease gun with au-

 

tomotive type grease to lubricate the jackshaft

Figure 10

assembly as shown in Figure 10.

 

How To Change Engine Oil

Change the engine oil when the engine is warm. For the proper oil capacity, see the en- gine manufacturer’s instructions.

1.Disconnect spark plug wire from the spark plug.

2.Remove the oil drain plug as shown in Figure 11.

3.Drain all the engine oil into a flat pan.

4.Install the oil drain plug. Make sure the oil drain plug is tight.

5.Remove the dipstick.

6.Fill the engine crankcase. DO NOT OVERFILL. For proper oil capacity, see the engine manufacturer’s instructions.

7.Connect the spark plug wire to the spark plug.

Oil Drain Plug

Figure 11

Engine Power Rating Information

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002−05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine−to−engine variability. Given both the wide array of products on which engines are placed and the variety of

environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual ”on−site” or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine−to−engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

1740514

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Powertrim Table of Contents Hayter Limited Limited WarrantyGeneral Operation Safety RulesSafety Precautions Responsibility Of The OwnerIV. Service II. Slope OperationIII. Children Safety Rules Control And Operating Pictorials Safety Warning PictorialsAssembly Assembly Contents of Parts BAGTo Remove the Trimmer from Carton HOW to Attach the Guard HOW to Raise the HandleEngine Preparation Fill Crankcase With OilFill Fuel Tank With Petrol Operation Know Your PowertrimHOW to Stop Trimmer Head HOW to Stop the EngineHOW to USE Trimmer Head Drive Lever HOW to USE Throttle ControlHOW to USE Primer Button Trimmer Tips HOW to Start the EngineMaintenance Product SpecificationsCustomer Responsibilities How To Lubricate Jackshaft AssemblyHow To Change Engine Oil Spark Plug HOW to Adjust the Height of the HandlebarHOW to Change Trimmer Lines Service and Adjustment HOW to Replace the Trimmer LineHOW to Replace the Drive Belt Storage TrimmerEngine Trouble Cause Correction Trouble Shooting ChartEngine will not stop Code 407E Key Description Code 407E Guide Assembly, Metal Height 1740514 1740514 How To Order Replacement Parts

111-1073 specifications

Hayter Mowers has been a respected name in lawn care for decades, and the Hayter Mowers 111-1073 model exemplifies the brand's commitment to quality, innovation, and user-friendliness. This push mower is specifically designed for the domestic user who values efficiency and performance in maintaining their lawn.

One of the standout features of the Hayter 111-1073 is its powerful 48V lithium-ion battery, delivering a reliable and consistent runtime for up to 45 minutes on a single charge. This means homeowners can easily manage lawn sizes of up to 600 square meters without interruptions, making it ideal for both small and medium-sized gardens. The charging time is approximately 90 minutes, ensuring the mower is ready for use shortly after completion of its previous task.

The mower is equipped with a 41 cm cutting deck, which strikes a balance between agility and coverage. This deck size enables users to efficiently navigate through tighter areas, while still providing adequate cutting width for open spaces. Additionally, it features a central height adjustment mechanism, allowing for five different cutting heights ranging from 25 mm to 70 mm. This flexibility enables users to adapt the mower to the varying needs of different grass types and conditions throughout the seasons.

The Hayter 111-1073 is noteworthy for its advanced design, including a lightweight yet robust construction that makes it easy to maneuver. The handle is ergonomically designed, providing comfort during extended use and ensuring better control. The mower also comes with a foldable handle, which allows for easy storage in compact spaces.

Another highlight is its efficient grass collection system, featuring a 50-liter grass box that minimizes the need for frequent emptying. This efficient collection reduces the need for additional clean-up after mowing, making the whole process smoother and more enjoyable.

Safety features, such as a brake that stops the blades within seconds of releasing the handle, ensure that users operate the mower confidently. The absence of petrol fumes and a quieter operation compared to traditional gas mowers also makes the Hayter 111-1073 a more environmentally friendly choice.

In conclusion, the Hayter Mowers 111-1073 is a remarkable combination of modern technology, thoughtful design, and practicality, making it an excellent choice for homeowners looking to keep their lawns in pristine condition. Its blend of performance, ease of use, and sustainability demonstrates why Hayter remains a leader in the lawn mower market.
Top Page Image Contents