Fuel Handling, Fuel safety | Husqvarna 335LS instruction

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

!Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Gasoline

CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded gasoline/oil mixture. Leaded gasoline will destroy the catalytic converter.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certiﬁed to operate on unleaded gasoline.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

	Gasoline, litre	Two-stroke oil, litre

		2% (1:50)
		2% (1:50)

	5	0,10

	10	0,20

	15	0,30

	20	0,40

	US gallon	US ﬂ. oz.

	1	2 1/2

	2 1/2	6 1/2

	5	12 7/8

English – 11

335L, 335LS specifications

The Husqvarna 335LS is a versatile and robust string trimmer designed for both professional landscapers and avid gardeners. This machine combines power, efficiency, and user-friendly features, making it an ideal choice for tackling a variety of trimming tasks around the home or on larger job sites.

One of the standout features of the Husqvarna 335LS is its powerful engine. Equipped with a 34.6cc, 2-stroke engine, it delivers high torque over a wide RPM range. This means that users can expect impressive performance while maintaining fuel efficiency, which is crucial for long working hours. The inclusion of the X-Torq technology not only enhances fuel efficiency but also reduces harmful emissions, aligning with today’s environmental standards.

The cutting equipment on the 335LS is designed to handle different types of vegetation effortlessly. It comes with a Tap 'N Go trimmer head that allows for easy line feeding, ensuring continuous operation without interruptions. This feature is particularly beneficial when dealing with thick grass or weeds, as users can quickly extend the cutting line as needed.

Another significant characteristic of the Husqvarna 335LS is its lightweight design. Weighing just under 12 pounds, it is easy to maneuver without causing fatigue. The ergonomically designed handle provides a comfortable grip, which allows for extended use without discomfort. Additionally, the adjustable handle helps users find their ideal working position, further enhancing comfort and control.

The machine is also equipped with a smart start function, which reduces the resistance in the starter cord, allowing for easier ignition. This is particularly useful for users who may struggle with traditional starting systems, making the 335LS accessible to a wider audience.

Durability is another key aspect of the Husqvarna 335LS. It features high-quality materials and components designed to withstand the rigors of regular use. This reliability is further bolstered by features such as the heavy-duty gear head and sturdy construction.

In conclusion, the Husqvarna 335LS is designed with innovation and user-friendliness in mind. Its powerful engine, advanced technologies, lightweight design, and ease of use make it an excellent choice for anyone looking to maintain their lawn or complete landscaping tasks. Whether you are a professional or a homeowner, this string trimmer promises exceptional performance and long-lasting service.