Husqvarna 536 LIL Starting and Stopping, Check before starting, Connect battery to the machine

Page 17

STARTING AND STOPPING

Check before starting

Li-ion

Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary.

Check that the trimmer head is completely attached to the trimmer.

Check that the machine is in perfect working order. Check that all nuts and screws are tight.

Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

Never use the machine without a guard nor with a defective guard.

All covers must be correctly fitted and undamaged before you start the machine.

Only use the machine for the purpose it was intended for.

Connect battery to the machine

Make sure to use fully charged batteries. Use only a Husqvarna original battery in your machine. See technical data.

Insert the battery in the machine. The battery should slide easily into the battery holder on the machine. If the battery does not slide in easily, it is not being inserted correctly. The battery will lock itself into place when you hear a click. Make sure the battery is fitted correctly to the machine.

Starting and stopping

!

WARNING! Make sure no unauthorised

persons are in the working area.

 

 

Otherwise there is a risk of serious

 

personal injury. The safety distance is 15

 

metres.

Starting

Turn on the machine. Press and hold the start button (>1 sec.) until the green LED is lit.

Use the power trigger to control the speed.

Stopping

Stop the machine by releasing the power trigger or the power trigger lockout and deactivate the machine.

Remove the battery from the machine by pressing the two release buttons and pulling out the battery.

IMPORTANT! Always remove the battery to prevent the machine being started by accident.

English 17

Image 17
Contents LiL 536 LiR Symbols on Battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Dear Customer IntroductionWhat is what? What is WHAT?General power tool safety warnings General Safety PrecautionsPersonal protective equipment Battery and battery chargerBattery charger safety Battery safetyControl panel Machine′s safety equipmentPower trigger lockout Cutting attachment guard Cutting equipmentTrimmer head Adjusting the harness and trimmer AssemblyFitting the loop handle Fitting the handlebarTransport position, handlebar Standard harnessBattery charger Battery HandlingBattery Transport and storage Disposal of the battery, battery charger and machineStarting and Stopping Connect battery to the machineCheck before starting Starting and stoppingSafety instructions while working Basic safety rulesWorking Techniques General working instructionsSavE mode Safety instructions after completing workAutomatic switch off functionality Rotation directionSweeping ClearingCutting Inspection and maintenance MaintenanceCleaning Trimmer lineBattery Troubleshooting scheduleBattery charger KeypadMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEN 60335-1, IEC 60335-2-91, EN 62133, EN 60335-2-29, EN ISO EC-declaration of conformity Applies to Europe only01/1610/002 T25B Page 1154529-26

536 LIL, 536 LIR specifications

The Husqvarna 536 LIR and 536 LIL are powerful, efficient, and lightweight battery-powered line trimmers designed specifically for professional landscapers and gardeners. These models stand out due to their reliable performance, advanced technologies, and user-friendly features, making them essential tools for maintaining gardens, parks, and other green spaces.

One of the key features of the Husqvarna 536 LIR and 536 LIL is their lightweight design. Weighing in at only 3.2 kg, these trimmers are easy to maneuver, reducing user fatigue during long work hours. This ergonomic design is complemented by an adjustable handle, allowing users to find their preferred working position for maximum comfort and control.

Performance-wise, both models are equipped with a high-performance brushless motor that delivers a powerful output while ensuring low noise levels, a significant advantage for urban landscaping tasks. The built-in battery technology offers extended run times, allowing professionals to work without interruptions. The trimmers are compatible with Husqvarna's BLi series of batteries, which provide quick charging and prolonged usage.

In terms of features, the Husqvarna 536 LIR comes with a tap & go trimmer head for easy line feeding, while the 536 LIL utilizes a semi-automatic line feeding system that allows for quick adjustments during operation. Additionally, both models include an efficient cutting system, which enhances productivity and allows users to cover more ground in less time.

The smart design of both models incorporates a low vibration feature to minimize strain on the user, leading to a more comfortable experience even after extended periods of use. The trimmers also feature a durable build quality, making them resistant to the wear and tear of daily use.

Technologically advanced, these trimmers come with a savE™ mode, which optimizes efficiency and extends battery life when maximum power is not necessary. This intelligent power management enables users to tailor their performance based on the task at hand, further enhancing the versatility of these tools.

In summary, the Husqvarna 536 LIR and 536 LIL are ideal choices for professional users looking for powerful, lightweight, and efficient battery-powered trimmers. With their excellent performance, advanced features, and user-friendly design, they offer professionals a reliable solution for maintaining pristine landscapes. Whether trimming edges or tackling tougher weeds, these tools exemplify the innovation and quality that Husqvarna stands for.