Husqvarna 325HS99X-series manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Approved hearing protection

• Approved eye protection

This product is in accordance with applicable EC directives.

Always wear approved protective gloves.

Wear sturdy, non-slip boots or shoes.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch

automatically returns to the start position. In order to prevent unintentional starting, the spark plug

cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

2 – English

Image 2
Contents 325HS75X-series 325HS99X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchHand guard MufflerBlades Gear housingAssembly of the catcher accessory Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineStopping Warm engineStarting Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniquesMaintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug MufflerCooling system Air filter Gear housingCleaning the air filter Oiling the air filterCleaning and lubrication Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Page Page Page Page 1151133-26