Husqvarna 326EX manual Symbol Explanation, Symbols

Page 2

Symbols

SYMBOL EXPLANATION

max 10000 rpm

15 m

15

m

50FT

50FT

WARNING! The edger can be dangerous!

Careless or incorrect use can result in serious or fatal injury to the operator or others.

Read through the Operator‘s Manual carefully and understand the content before using the machine.

Always use

A protective helmet where there is a risk of falling objects

Ear protection

Approved eye protection

Max. speed of output axle, rpm

This product is in accordance with applicable CE directives.

Beware of thrown objects and ricochets.

Warning for rotating blade. Keep hands and feet clear.

Warning! The blade continues to rotate even after the engine has stopped.

When the engine has stopped, stop the blade from rotating by letting the blade come in contact with the ground.

Indicates the direction of rotation.

The operator of the machine must ensure that no persons or animals comes within a 15 metre radius while working.

Arrows which show limits for handle mounting.

• Always wear approved protective gloves.

• Use anti-slip and stable boots.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Checks and/or maintenance should be carried out with the engine switched off, with the stop switch in the STOP position.

Always wear approved protective gloves.

Regular cleaning required.

Ocular control.

Approved eye protection must always be used.

2 – English

Image 2
Contents 326EX-SERIES 114 00Symbol Explanation SymbolsContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Cutting equipment Vibration damping systemMuffler Locking nutSafety Instructions Safety Instructions Safety instructions before starting work General safety instructionsSafety instructions regarding the surroundings Personal protectionTransport and storage Fuel safetyStart General working instructions Basic working techniques Safety instruction while workingBasic safety precautions Safety instructions after completing work What is WHAT? What is what on the edger?Assembling the angle gear AssemblyAssembling the blade Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Maintenance CarburetorHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Muffler with catalytic converter Cooling system Spark plugLubricating the flexible drive axle Adjusting the edger‘s cutting depthAir filter Angle gearWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenance326E-X Technical DataTechnical data ´+H!¶3l¨22 Page 2001W22