Husqvarna 123C, 123LD General safety precautions, Fuel safety, Starting, Transport and storage

Page 8

SAFETY INSTRUCTIONS

General safety precautions

IMPORTANT!

The machine is only designed for trimming grass.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Never use the machine in extreme weather conditions such as severe cold, very hot and/or humid climates.

Never use a machine that has been modified in any way from its original specification.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

WARNING! A faulty cutting attachment may

!increase the risk of accidents.

Starting

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

The complete clutch cover and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand

8 – English

(CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

Never wrap the starter cord around your hand

Fuel safety

Always use a fuel container with an anti-spill valve.

Never refuel the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling.

Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

4Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

Transport and storage

Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

When storing and transporting fuel always use approved containers intended for this purpose.

When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to find out where to dispose of excess fuel.

Image 8
Contents 123C 123L 123LD KEY to Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Vibration damping system MufflerCutting equipment Locking nutSafety Instructions Cutting equipment Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Grass trimming using a trimmer head and plastic bladesGeneral working instructions Basic working techniquesCutting What is WHAT? What is what?Assembly Fitting the loop handleAssembling and dismantling the two-piece shaft Fitting the trimmer guard and trimmer headGuard 123CFuel Handling FuelGasoline Two-stroke oilFuelling Starting and Stopping Check before startingStarting and stopping Cold engineWarm engine StoppingMaintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorMuffler High speed jet HCooling system Spark plugTwo-piece shaft Air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataAttachments Art No Use with Federal Emission Control Warranty Statement Your Warranty Rights and Obligations095-.106 15 cm Clic´z+H6G¶5I¨ 1140223-95
Related manuals
Manual 8 pages 53.3 Kb

123C, 123LD, 123L specifications

The Husqvarna 123L is a lightweight and efficient trimmer designed for homeowners and garden enthusiasts seeking a reliable tool for trimming grass and managing tough weeds. It combines power, usability, and innovativeness, making it an ideal choice for maintaining residential landscapes.

At the heart of the Husqvarna 123L is a powerful 28cc two-stroke engine that delivers impressive performance while remaining lightweight. This engine is designed for optimal fuel efficiency, enabling users to work longer without frequent refueling. The low-emission technology incorporated into the engine ensures that it meets strict environmental standards, reducing the impact on the surrounding ecosystem.

One of the standout features of the Husqvarna 123L is its Smart Start technology. This innovation simplifies the starting process, allowing users to start the trimmer with minimal effort. The engine is designed to reduce resistance in the starter cord, enabling an easier pull every time. This attribute is particularly useful for those unfamiliar with small engine operation or for users who may have physical limitations.

The trimmer's ergonomically designed handle contributes to its comfort and usability. The adjustable handle allows for customization to fit the user's height and preferred operation angle, which reduces fatigue during extended use. Additionally, the trimmer features a lightweight construction, making it easy to maneuver around gardens and landscapes.

Another impressive characteristic of the Husqvarna 123L is its efficient cutting system. It comes equipped with a 0.080-inch cutting line, which provides a clean cut while ensuring durability for improved longevity. The trimmer head allows for easy line replacement, enabling users to quickly resume work without wasting time on complicated maintenance.

Moreover, the Husqvarna 123L is equipped with a heavy-duty, durable casing, ensuring that it withstands tough working conditions while providing consistent performance. The built-in air filter reduces contamination and prolongs the life of the engine, ensuring reliability with every use.

In summary, the Husqvarna 123L is an ideal choice for homeowners who need a powerful yet manageable trimmer. With its effective 28cc engine, Smart Start technology, ergonomic design, and efficient cutting system, this trimmer proves to be a valuable addition to any garden tool collection. Its commitment to power, comfort, and innovation allows users to maintain their landscapes effortlessly.