Husqvarna 124C manual Technical Data, Technical data

TECHNICAL DATA
Technical data	124C
Engine
Cylinder volume, cu.in./cm3	1.7/28
Cylinder bore, inch/mm	1.4/35
Stroke, inch/mm	1.130/28.7
Idle speed, rpm	2,800--3,200
Recommended max. speed, rpm	11,000
Speed of output shaft, rpm	8,000
Max. engine output, acc. to ISO 8893, hp/kW	1.1/0.8
Catalytic converter muffler	Yes
Speed--regulated ignition system	No
Ignition system
Manufacturer/type of ignition system	Walbro/CD
Spark plug	Champion RCJ--6Y
Electrode gap, inch/mm	0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor	Zama
Fuel tank capacity, US pint/liter	0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, lbs/kg	10/4.4
Sound levels
(see note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3--1997, dB(A),
min/max:	94/97
Vibration levels
Vibration levels at handles, measured according to
ANSIB175.3--1997, m/s2
At idle, left/right handles:	3/5
At max. speed, left/right handles:	9/8

Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

Model 124C (3/8 RH arbor shaft thread)

Approved accessories	Type	Cutting attachment guard, part. no.
Trimmer head	T25	537 33 83--03

19