Husqvarna 325HD60X, 325HD75X Air filter, Gear, Cleaning and lubrication, Cleaning the air filter

Page 18

MAINTENANCE

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder. Check that the spark plug is fitted with a suppressor.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts.

•Excessive fuel consumption.

Clean the filter every 25 hours, or more regularly if conditions are exceptionally dusty.

Cleaning the air filter

Remove the air filter cover and take out the filter. Wash it clean in warm, soapy water. Ensure that the filter is dry before refitting it.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

If the machine is used in dusty conditions the air filter should be soaked in oil. See instructions under the heading Oiling the air filter.

Oiling the air filter

Always use HUSQVARNA filter oil, art. no. 531 00 92-48. The filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the filter inside the plastic bag and pour off the excess before fitting the filter to the machine. Never

use common engine oil. This would drain through the filter quite quickly and collect in the bottom.

Gear

There is a grease nipple and a plug for filling lubricant on the gear housing. Use a grease gun to fill with grease. This should be done after every 60 working hours. Use Husqvarna’s special grease, no. 503 98 96-01.

CAUTION! The gear housing must not be filled completely with grease. The grease expands as the machine heats up during operation. If the gear housing was completely filled with grease it could damage the seals and lead to leakage of grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

Cleaning and lubrication

Clean any resin and plant residue from the blades using cleaning agent 531 00 75-13 (UL22) before and after using the machine.

Lubricate the blade bars with special grease, part no. 531 00 75-12 (UL 21) before long periods of storage.

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 323HD60 325HD60X-series EnglishKEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?Lock for handle 325HD60, 325HD75 General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchHand guard MufflerBlades Blade guardGear Fuel safety Fuel HandlingFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping Stopping Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniques325HD60, 325HD75 Maintenance CarburettorMuffler Cooling system Spark plugAir filter Cleaning and lubricationCleaning the air filter GearMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Page Page Page Page Page Page Original instructions 1153242-26

323HD60, 325HD75X, 325HD60X specifications

The Husqvarna 325HD60X, 323HD60, and 325HD75X are powerful and versatile hedge trimmers designed for professional landscapers, gardeners, and property maintenance personnel. With a focus on performance, durability, and ease of use, these models are equipped with advanced technologies to help users achieve impeccable results with trimming and shaping hedges and shrubs.

The Husqvarna 325HD60X features a robust 25.4cc engine, which provides outstanding power for tackling dense foliage. Its dual-sided blades are designed for better cutting efficiency, delivering a clean and precise cut with minimal vibration. The adjustable rear handle allows users to easily maneuver the trimmer in various positions, enhancing comfort and reducing fatigue during extended use. Additionally, the model includes a smart start feature that reduces resistance in the starter cord, making it easier to start the engine.

On the other hand, the Husqvarna 323HD60 is a slightly lighter model, making it perfect for residential trimming tasks. It comes with a 21.7cc engine that balances power and fuel efficiency. The trimmer's double-sided blade enables efficient cutting performance, while the integrated anti-vibration technology minimizes vibrations transmitted to the operator's hands, ensuring a more comfortable experience. The 323HD60 is also designed with a low-emission engine, adhering to environmental standards without compromising performance.

Lastly, the Husqvarna 325HD75X stands out with its high cutting capacity, featuring a longer blade for expansive trimming tasks. Its powerful 25.4cc engine ensures consistent performance, making it ideal for commercial use where high productivity is demanded. This model also incorporates ergonomic features, such as an adjustable rear handle and an anti-vibration system, allowing for extended use without causing strain. Moreover, the fuel-efficient design and low emissions promote environmental sustainability.

All three models are equipped with Husqvarna's unique X-Torq technology, which reduces fuel consumption and exhaust emissions, thus optimizing performance and lowering the environmental impact. The cutting-edge design and robust construction of these hedge trimmers guarantee longevity, making them reliable choices for any trimming project. With their specific features tailored to meet various needs, the Husqvarna 325HD60X, 323HD60, and 325HD75X hedge trimmers combine innovation and practicality to support professional landscaping endeavors.
Top Page Image Contents