Working Techniques, Basic safety rules

WORKING TECHNIQUES

General working instructions

IMPORTANT!

This section takes up the basic safety precautions for working with a trimmer.

If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop.

Avoid all usage which you consider to be beyond your capability.

You must understand the difference between forestry clearing, grass clearing and grass trimming before use.

Basic safety rules

1 Look around you:

•To ensure that people, animals or other things cannot affect your control of the machine.

•To ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting attachment.

•CAUTION! Do not use the machine unless you are able to call for help in the event of an accident.

2Inspect the working area. Remove all loose objects, such as stones, broken glass, nails, steel wire, string, etc. that could be thrown out or become wrapped around the cutting attachment.

3Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and often brings added risks, such as icy ground, unpredictable felling direction, etc.

4Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.

5 Keep a good balance and a ﬁrm foothold.

6Always hold the machine with both hands. Hold the machine on the right side of your body.

7Keep the cutting attachment below waist level.

8The engine must be switched off before moving.

9Never put the machine down with the engine running unless you have it in clear sight.

WARNING! Neither the operator of the

!machine nor anyone else may attempt to remove the cut material while the engine is running or the cutting equipment is rotating, as this can result in serious injury.

Stop the engine and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards. You could get burnt if you touch it.

WARNING! Watch out for thrown objects.

!Always wear approved eye protection. Never lean over the cutting attachment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. Never swing the machine around without ﬁrst checking behind you to make sure no-one is within the safety zone.

Basic working techniques

Always slow the engine to idle speed after each working operation. Long periods at full throttle without any load on the engine can lead to serious engine damage.

WARNING! Sometimes branches or grass

!get caught between the guard and cutting attachment. Always stop the engine before cleaning.

16 – English

324L, 324LD specifications

The Husqvarna 324L and 324LD are versatile and powerful trimmers designed for both professional landscapers and gardening enthusiasts. With their advanced features and technologies, they stand out as reliable tools for maintaining lawn aesthetics and tackling tough vegetation.

One of the primary characteristics of these models is their cutting efficiency. Both the 324L and 324LD are equipped with a robust 25.4cc two-stroke engine that provides a strong power-to-weight ratio, allowing users to tackle various tasks with ease. The engines in these trimmers are designed for performance and deliver a consistent cutting speed, making them suitable for everything from refined garden edges to clearing dense brush.

In terms of ergonomics, Husqvarna prioritizes user comfort and control. The 324L and 324LD come with an adjustable handle that can be easily manipulated to fit the user's height and preference, leading to extended usage without fatigue. The lightweight design further enhances maneuverability, allowing users to navigate around obstacles and reach difficult areas without straining.

Another notable feature is the excellent cutting system. Both models include a Tap ‘n Go spool, which allows users to easily extend the trimmer line by tapping the head on the ground. This convenient feature ensures continuous performance without needing to stop and manually adjust the line. Additionally, the dual line cutting system provides an optimized cutting area, resulting in faster work completion.

Husqvarna has integrated several cutting-edge technologies into these models for increased efficiency and ease of maintenance. The air purge system removes air from the carburetor and fuel system, facilitating smooth starting. The Smart Start technology reduces the resistance in the starter cord by up to 40%, making it easier to start the engine even in challenging conditions.

Both trimmers are also designed with durability in mind. The reinforced materials used in construction resist wear and tear, ensuring longevity in tough environments. The design further promotes effective cooling to enhance engine performance and prolong service life.

In summary, the Husqvarna 324L and 324LD are well-equipped trimmers that combine performance, comfort, and innovative technology. With their robust engines, ergonomic design, advanced cutting systems, and durable construction, they are ideal choices for anyone seeking reliable tools for lawn care and landscaping maintenance. Whether for professional use or personal projects, these trimmers deliver quality results with every operation.