Fuel Handling, Fuel safety | Husqvarna 250 R specification

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local gas station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

WARNING! Take care when handling fuel.

!Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Gasoline

CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded gasoline/oil mixture. Leaded gasoline will destroy the catalytic converter.

Use low-emission gasoline, also known as alkylate gasoline, if it is available.

This engine is certiﬁed to operate on unleaded gasoline.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

	Gasoline, litre	Two-stroke oil, litre

		2% (1:50)
		2% (1:50)

	5	0,10

	10	0,20

	15	0,30

	20	0,40

	US gallon	US ﬂ. oz.

	1	2 1/2

	2 1/2	6 1/2

	5	12 7/8

22 – English

250 R specifications

The Husqvarna 250 R stands as a prominent contender in the realm of off-road motorcycles, particularly for those who seek performance and rideability in rugged terrains. This model encapsulates a combination of advanced engineering and rider-focused design, making it a favorite among both amateur and experienced riders.

One of the standout features of the Husqvarna 250 R is its powerful engine. The bike is powered by a 249cc, single-cylinder, two-stroke engine, optimized for maximum performance across various riding conditions. With its lightweight construction, the engine delivers impressive power without sacrificing maneuverability. Riders can expect robust acceleration and excellent throttle response, which is crucial for navigating challenging trails and obstacles.

The Husqvarna 250 R also incorporates cutting-edge technologies that enhance its performance. One notable feature is the electronic fuel injection system, which ensures optimal fuel delivery and improved efficiency. This technology not only contributes to the overall performance of the engine but also minimizes emissions and enhances fuel economy. The bike’s adjustable power valve allows for customizable power delivery, catering to the rider’s preferences and the riding environment.

Another significant aspect of the Husqvarna 250 R is its lightweight chassis, constructed from high-quality materials. The frame is designed to provide excellent rigidity while keeping the overall weight to a minimum. This balance of strength and lightness contributes to the bike's agility and ease of handling, making it versatile for various riding styles and terrains.

Suspension is another critical feature of the Husqvarna 250 R. The bike is equipped with fully adjustable WP XACT forks at the front and a WP XACT shock at the rear, offering superior damping capabilities. This advanced suspension system provides enhanced stability and comfort, allowing for better control during aggressive maneuvers or when tackling rough terrains.

The ergonomics of the Husqvarna 250 R are tailored to enhance the riding experience. The seat is designed for optimal comfort, providing support during long rides while ensuring that riders can easily shift their weight when necessary. The bike also features wide footpegs that deliver excellent grip and control.

In summary, the Husqvarna 250 R is a remarkable off-road motorcycle that combines performance, advanced technology, and rider-friendly design. Its powerful engine, lightweight chassis, superior suspension system, and ergonomic features make it an ideal choice for adventure enthusiasts looking to conquer the trails with confidence and agility. Whether navigating through tight woods or tackling open trails, the Husqvarna 250 R is engineered to deliver an exhilarating riding experience.