Husqvarna 123HD60 manual Gear housing, Cleaning and lubrication

Page 17

MAINTENANCE

Gear housing

There is a grease nipple on the gearbox. Use a grease gun to top up with grease. This should be carried out after approximately every 60 working hours. Use Husqvarna special grease, No. 503 98 96-01.

CAUTION! The gear housing must not be filled completely with grease. The grease expands as the machine heats up during operation. If the gear housing was completely filled with grease it could damage the seals and lead to leakage of grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

Cleaning and lubrication

Clean any resin and plant residue from the blades using cleaning agent 531 00 75-13 (UL22) before and after using the machine.

Lubricate the blade bars with special grease, part no. 531 00 75-12 (UL 21) before long periods of storage.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 123HD60 Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lock Machine′s safety equipmentStop switch Muffler Hand guardVibration damping system Blade guard Gear housingBlades Fuel Fuel safetyFuel Handling Mixing FuellingStarting and stopping Starting and StoppingCheck before starting Safety instructions while working Safety instructions regarding the surroundingsWorking Techniques General working instructionsBasic working techniques Safety instructions after completing workAdjusting the idle speed MaintenanceCarburettor MufflerCooling system Cleaning the air filterSpark plug Air filterCleaning and lubrication Gear housingMaintenance Daily Weekly Monthly Maintenance scheduleEC-declaration of conformity Applies to Europe only Technical DataTechnical data 1150168-26 ´z+R0r¶6¨ ´z+R0r¶6¨
Top Page Image Contents