Troy-Bilt 52066, 52070 owner manual Assembly, From the receptacle T

Page 8

8Section 2: Assembly

STEP 6: CONNECT AND CHARGE BATTERY (Electric Start Model)

The battery (N, Figure 2-5) is located behind the debris shield (O). Lift and tilt the debris shield forward to access the battery.

DANGER

•Wet conditions can cause an electric shock hazard during battery charging. Avoid wet conditions when charging battery.

•Charging the battery with improper equipment could cause a battery explo- sion. Use only the battery charger sup- plied with the unit. The engine must be shut off and the spark plug wire discon- nected before charging the battery.

Failure to comply could result in per- sonal injury or property damage.

1. Firmly connect terminal (P, Figure 2-6) on end of wires leading from battery to receptacle (R) on end of wires leading from wiring harness.

2.Connect the terminal (S, Figure 2-7) on the supplied battery charger to the recharging line receptacle (T) on the wiring harness (located behind key switch).

3.Plug the charger box (U) into a grounded, 120V wall outlet. Initially charge the battery for 24 hours before using the electric starter. After charging, unplug the charger box (U) from the wall outlet and then disconnect the terminal

(S) from the receptacle (T).

O

 

 

N

 

 

 

•

 

•

•haztahescmuatOtlilbndTHROjeecbtsrissucWNhasr

WAR

andosthpDearorkmnpoolvtuiRsgnegOTATwrvpiriBacereeitssoafeldruINeeinarstKtdlGceaetjowsuoensspaCUTThntyeicecdnfhcudrgirtoteldeitdnmnidnrtee.ooINgmnibseh,asyGpsectegtaaheosdctiHhnsplaeoeepnaEAsarendw.dddwh,eDrixbilelepylsosboutseplaeteOBJECTntidnhordagrcbeotkoriniwsnsd,gny5sp.i0vepgibanobrilfetlisencHA!satlnyatnbZAdy RDNING

Figure 2-5: Lift and tilt debris shield forward to locate battery.

R

P

Figure 2-6

U

S

T

 

Figure 2-7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Trimmer/Mower Table of Contents Safety General OperationNever run the engine inside a closed area Do notRemove objects such as rocks, tree limbs, etc Safety On right side, rear Mower deck On top of mower deckIntroduction AssemblyAssembly Steps Assembly Check Trimmer Head HardwareAssembly From the receptacle TFeatures and Controls Features and ControlsHere, with word descrip Tions are used onPRE-START Checklist Adjust Handlebar HeightAdjust Line Cutting Height OperationUsing the Trimmer Head Control Bail Operating the MachineExercise caution when changing direction on slopes Length MaintenanceFor the most precise cutting possible, be sure to select Nique allows the cutting head to follow the ground contourMaintenance Maintenance ScheduleAdjusting Trimmer Head Engagement To Adjust Belt TensionBelt Inspection Belt ReplacementInspecting and Replacing the Drive Belt Lubrication Belt Performance TroubleshootingCleaning the Engine TRIMMER/MOWER Cleaning and Debris Removal General Engine MaintenanceCompact Storage Change the oil after every 25 hoursTo Change Trimmer Lines Trimmer lines can be changedBattery Service Battery RechargingBattery Replacement Tilt the debris shield forwardTroubleshooting Problem Possible Cause CorrectionDrawing no Ref. # Description Qty Parts List Drawing noRef. # Description Parts List 1915963 1910850001 715 133 Accessories and Kits Description QtyPage Warranty Service Replacement PartsEngine Service and Repair Owner Registration Card

52066, 52070 specifications

The Troy-Bilt 52070 and 52066 are powerful tillers designed for home gardening enthusiasts and professionals alike, offering remarkable performance and ease of use. Troy-Bilt, a well-known brand in gardening equipment, has incorporated advanced features and technologies in these models to enhance tilling efficiency and ensure user comfort.

One of the standout features of the Troy-Bilt 52070 and 52066 tillers is their robust engine options. Both models come equipped with a reliable 160cc OHV engine, providing ample power to tackle tough soil types and overgrown garden beds. This engine delivers consistent performance, ensuring that users can complete their tilling tasks in a timely fashion.

The tilling width ranges from 16 to 21 inches, allowing for versatile usage depending on the size of the garden or area being worked on. The adjustable tilling depth, reaching up to 7 inches, ensures that users can cultivate the soil to the desired texture, whether for planting or aerating purposes.

Another innovative aspect of these tillers is the patented Bolo tilling blades. These specially designed blades are engineered to break up tough soil effectively, reducing the amount of effort required and increasing the depth of cultivation. The blades are made from durable materials, ensuring longevity and consistent performance even under demanding conditions.

The Troy-Bilt 52070 and 52066 also feature a user-friendly design, making them accessible to gardeners of all skill levels. The adjustable handlebars offer customizable height settings, enhancing comfort during operation. Additionally, both models are equipped with a forward and reverse self-propulsion system, giving users better control and maneuverability in tight spaces and while navigating through obstacles.

Furthermore, these tillers include a check plug feature for easy oil maintenance, ensuring optimal engine performance over time. The removable and adjustable side shields assist with debris management, keeping the work area tidy and safe.

In conclusion, the Troy-Bilt 52070 and 52066 tillers combine powerful performance with user-friendly features, making them ideal for anyone looking to cultivate their garden efficiently. With their durable construction, advanced tilling technology, and thoughtful design, these models represent a reliable investment for both novice and experienced gardeners.
Top Page Image Contents