Lubrication, Maintenance, Threading Trimmer Line

WARNING: Always stop engine and	cleaner, refer to the separate engine manual
disconnect spark plug wire before	packed with your unit.
cleaning, lubricating or doing any kind of	• The spark plug should be cleaned and the gap
maintenance on your string trimmer	reset once a season. Check engine manual for
mower.	correct plug type and gap specifications.

Lubrication

Control Lever: Lubricate the pivot points on the control lever at least once a season with light oil.

See Figure 7.

Wheels: Lubricate the wheels at least once a season with light oil. See Figure 7.

Engine: Follow the separate engine manual packed with you unit for lubrication instructions.

Lubricate

Figure 7

Maintenance

NOTE: When tipping the unit, empty the fuel tank and keep the spark plug side of engine up. Never tip the string trimmer mower more than 90 degrees and do not leave the unit tipped for any length of time. Oil can drain into the upper part of the engine causing a starting problem.

Engine

Refer to the separate engine manual for all engine maintenance instructions.

•Check engine oil level before each use as instructed in the separate engine manual packed with your unit. Read and follow instructions carefully.

•Replace air cleaner every 25 hours under normal conditions or once a season. Clean every few hours under extremely dusty conditions. To service the air

Threading Trimmer Line

WARNING: Always stop engine, discon- nect spark plug wire, and ground against the engine before threading trimmer line on your string trimmer mower. Wait for the trimmer line to stop rotating.

When the trimmer line becomes too short or worn, change to a new trimmer line as follows:

•Remove the worn trimmer line and replace with new trimmer line packed with your string trimmer mower. Always use OEM-743-0112 when purchasing additional trimmer line.

•Fold new trimmer line in half and thread the ends of line through the loop from the inside out without going all the way through the loop. See Figure 8.

•Slide the loop end of the trimmer line under the metal tab and secure in place by crossing and pulling tight on the ends of the line. See Figure 8.

Loop

Trimmer

Line

Metal Tab

Figure 8

258 specifications

Troy-Bilt has established itself as a leading name in outdoor power equipment, and the Troy-Bilt 258 and 256 models stand out for their reliability and performance. Both of these trimmers are designed for homeowners, landscaping professionals, and garden enthusiasts seeking efficiency and ease of use in maintaining their yards.

One of the main features of the Troy-Bilt 258 and 256 is the powerful 25cc two-cycle engine. This engine delivers the necessary performance to tackle tough vegetation while providing a lightweight and maneuverable design. The trimmers' engines are designed for easy starting, minimizing frustration for users. The JumpStart technology, available on both models, allows for an effortless starting experience using a drill. This eliminates the need for manual pulling, making it especially appealing to those who may struggle with traditional pull-start mechanisms.

Another notable characteristic of the Troy-Bilt 258 and 256 is their versatile cutting capabilities. Equipped with a dual-line bump head, these trimmers allow for quick line advancement with a simple tap on the ground, ensuring that users can maintain a continuous cutting process without interruptions. The 16-inch cutting swath ensures that users can cover larger areas in a shorter amount of time, making these trimmers efficient for trimming edges and handling tougher spots around the lawn.

Comfort is a primary focus in the design of these trimmers. Both models feature ergonomic handlebars that provide a secure grip and reduce user fatigue during extended use. The adjustable shaft allows for customization to different user heights, promoting better posture and comfort during operation. This attention to user experience is crucial for both casual users and professionals who spend hours maintaining landscapes.

In terms of durability, the Troy-Bilt 258 and 256 are built with high-quality materials designed to withstand frequent use in various outdoor conditions. The trimmers are resistant to wear and tear, allowing them to last through the seasons.

Overall, the Troy-Bilt 258 and 256 trimmers combine power, versatility, and user-friendly features, making them worthwhile options for anyone looking to maintain their lawn effectively. These models provide a blend of advanced technologies and practicality, ensuring they meet the demands of modern landscaping tasks. Whether for residential use or professional applications, the Troy-Bilt 258 and 256 promise efficiency and reliability in yard care.