Ryobi RY30963 Attaching the Front Handle CS30 and SS30, Attaching the J Handle BC30, Flat Washer

Page 11

ASSEMBLY

ATTACHING THE FRONT HANDLE - CS30 AND SS30

See Figure 4.

Remove 2 wing nuts, 2 bolts, and clamp from the front handle.

Install the front handle onto the top side of the drive shaft housing and move it to a comfortable position.

Place the bolt through the front handle.

NOTE: The hex bolt head fits inside the hex recess molded into one side of the handle.

Reinstall the clamp, bolts, and wing nuts.

Tighten wing nut securely.

ATTACHING THE “J” HANDLE - BC30

See Figure 5.

A “J” handle must be used for ensuring the best control and maximizing operator safety when using a brushcutter.

Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left.

Insert the end of the handle between the clamps.

Align the bolt holes and push the long bolt (1/4-20 x 1-1/2 in.) through the handle side.

Place short bolt (1/4-20 x 1 in.) through opposite side of clamp. Install flat washers, lock washers, and hex nuts to hold the assembly in place.

After assembly is complete, adjust the position of the handle for best balance and comfort.

Tighten first the long bolt and then the short bolt.

FRONT HANDLE

BOLT

 

 

WING

 

 

NUT

 

 

CLAMP

 

 

Fig. 4

 

BOLT

 

FRONT

1/4-20 x 1 in.

BOLT

 

 

1/4-20 x 1-1/2 in.

HANDLE

 

 

 

 

 

STRAP

 

 

HANGER

CLAMP

 

 

CLAMP

FLAT WASHER

 

LOCK WASHER

HEX NUT

Fig. 5

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsSymbol Signal Meaning ServiceCoupler FeaturesFeatures Assembly See Figure Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerFlat Washer Attaching the Front Handle CS30 and SS30Attaching the J Handle BC30 Front Handle Bolt Wing NUT ClampAttaching the Brushcutter Guard BC30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 To Attach the Straight Shaft Grass Deflector SS30Converting from String Trimmer to Brushcutter BC30 Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Removing the TRI-ARCBLADE and Brushcutter GuardGear Head Flanged Washer Slot Installing the TRI-ARCBLADE and Brushcutter GuardOperation Removing the Straight Shaft Grass Deflector and String HeadOperating the Trimmer Fueling and Refueling the TrimmerGrass Deflector Line Trimming CUT-OFF Blade To Advance the Cutting LineTo Advance the Cutting Line Manually Cutting TipsCutting Technique Blade Operating the BrushcutterBlade Thrust TRI-ARCBLADETo Stop the Engine Starting and StoppingSee Figures 21 To Start a Cold EngineSee Figures 24 MaintenanceGeneral Maintenance Spool ReplacementSee Figures 26 String ReplacementCleaning the Exhaust Port and Muffler Spark ArrestorStoring the Product Replacing and Cleaning AIR FilterSpark Plug Replacement Fuel CAPIdle Speed Screw TroubleshootingSpeed. See Figure This Product WAS Manufactured with a Catalyst Muffler WarrantyLimited Warranty Statement MANUFACTURER’S Warranty Coverage California Proposition Parts and Service

RY30963, RY30943, RY30923, RY30542 specifications

Ryobi has established a solid reputation in the outdoor power equipment sector, and its line of string trimmers includes models like the RY30542, RY30943, RY30923, and RY30963, each tailored to cater to varying consumer preferences and lawn care needs.

The RY30542 is a lightweight and compact model that excels in ease of use. Its 30cc engine provides ample power for quick trimming tasks while maintaining maneuverability. A standout feature is its Speed Spool 2.0 system, allowing users to reload the trimmer line easily without the need for tools. This model's design combines efficiency and effective cutting performance, making it a favorite among homeowners for maintaining smaller yards.

Next is the RY30943, which offers a robust 40cc engine. This model is designed for users who require increased power for larger areas or tougher terrain. The RY30943 is equipped with a heavy-duty gearbox that enhances durability and performance. The attachment capability is another highlight, allowing this trimmer to be converted into various tools such as edgers, blowers, and brush cutters. This versatility makes it an excellent choice for those seeking an all-in-one solution for lawn care.

The RY30923 takes the concept of efficiency a step further with its 25cc engine. Ideal for residential use, its lightweight and ergonomic design contributes to less fatigue during extended trimming sessions. The two-cycle engine technology ensures that the device delivers a consistent performance while being eco-friendly. This model is particularly popular among gardeners looking for an effective yet environmentally considerate option.

Lastly, the RY30963 stands out with its hybrid design, incorporating a powerful 30cc engine combined with advanced vibration reduction technology. This feature minimizes operator fatigue, allowing for longer use without discomfort. The RY30963 also boasts a bump feed head for easy line advancement, enhancing the overall user experience. Its design caters to both efficiency and user comfort, resulting in a well-rounded tool for trimming and edging.

In summary, the Ryobi RY30542, RY30943, RY30923, and RY30963 string trimmers each offer unique features and benefits tailored for different user needs. From lightweight models designed for easy handling to powerful, versatile options suitable for larger yards, Ryobi's string trimmers stand as reliable choices that exemplify quality and innovation in lawn care technology.
Top Page Image Contents