Ryobi LE720r manual Rules for Safe Operation, Before Operating

Page 3

RULES FOR SAFE OPERATION

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. Attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pictographs.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

WARNING: Failure to obey a safety warning can result in injury to yourself and others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock, and personal injury.

• IMPORTANT SAFETY INFORMATION •

READ ALL INSTRUCTIONS

BEFORE OPERATING

Read the instructions carefully. Be familiar with the controls and proper use of the unit. Carefully read this manual and the operator’s manual of the unit that will power this add-on.

Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.

Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.

Inspect the unit before use. Ensure the blade is installed correctly and secure.

Clear the area to be edged before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the edging attachment.

SAFETY WARNINGS FOR GAS TRIMMERS AND LAWN EDGERS

WARNING: Gasoline is highly flammable, and its vapors can explode if ignited. Take the following precautions:

Store fuel only in containers specifically designed and approved for the storage of such materials.

Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

Mix and add fuel in a clean, well-ventilated area outdoors where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately.

Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke, keep sparks and open flames from the area while adding fuel or operating the unit.

Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.

SAFETY WARNINGS FOR ELECTRIC TRIMMERS AND LAWN EDGERS

WARNING: To reduce the risk of electrical shock, use only extension cords approved for outdoor use, such as an extension cord of cord type SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-W or SJTOW-A. Extension cords are available from your local retailer. Use only round-jacketed extension cords approved for outdoor use.

CORD SETS: Make sure your cord set is in good condition. When using a cord set, be sure to use a cord that is heavy enough to carry the current that your unit will draw.An undersized cord set will cause a drop in line voltage resulting in loss of power and over- heating. See the operator’s manual for the unit that will power this add-on for the recommended cord size.

Inspect all extension cords and the unit power connection periodically. Look closely for deterioration, cuts or cracks in the insulation. Also inspect the connections for damage. Replace the cords if any defects or damage appear.

Avoid dangerous environments. Never operate your unit in damp or wet conditions. Moisture is a shock hazard.

Do not use the unit in the rain.

Do not handle the plug or unit with wet hands or standing on any wet surfaces.

Do not leave the unit plugged in when not in use, changing attachments or add-ons, or while being serviced.

3

Image 3
Contents OPERATOR’S Manual Introduction Table of ContentsBefore Operating Safety Warnings for GAS Trimmers and Lawn EdgersSafety Warnings for Electric Trimmers and Lawn Edgers Rules for Safe OperationFor Service INFORMATION, Call Other Safety WarningsSafety and International Symbols Symbolmeaning Safety Alert SymbolApplications Know Your UnitOperating the CLICK-LINK System Operating InstructionsAdjusting Edger Cutting Depth Holding the Unit with Edger ADD-ONTips for Best Edging Results Edger Blade Replacement Maintenance and Repair InstructionsEdger ADD-ON SpecificationsLimited TWO-YEAR Warranty