Ryobi P2000 Spool Replacement, String Replacement, STORing the trimmer, See Figures 15

Page 14

MAINTENANCE

SPOOL REPLACEMENT

See Figure 15.

Use only round type .065 in. diameter monofilament string. Use original manufacturer’s replacement string for best performance.

Remove the battery pack.

Push in tabs on side of spool retainer.

Pull spool retainer up to remove.

Remove the old spool.

To install the new spool, make sure the string is captured in the slot on the new spool. Make sure the end of the string is extended approximately 6 in. beyond the slot.

Install the new spool so that the string and slot align with the eyelet in the string head. Thread the string into the eyelet.

Pull the string extending from the string head so the string releases from the slot in the spool.

Reinstall the spool retainer by depressing tabs into slots and pushing down until spool retainer clicks into place.

STRING REPLACEMENT

See Figures 15 - 16.

Remove the battery pack.

Remove the spool from the string head.

NOTE: Remove any old string remaining on the spool.

Cut a piece of string approximately 9 ft. (2.7 m) long. Use only .065 in. (1.65 mm) diameter monofilament string.

Insert the string into the anchor hole in the upper part of the spool. Wind the string around the upper part of the spool clockwise, as shown by the arrows on the spool. Place string in the slot on upper spool flange, leaving about 6 in. (152 mm) extended beyond the slot. Do not overfill. After winding the string, there should be at least 1/4 in. (6 mm) between the wound string and the outside edge of the spool.

Replace the plastic retainer, spool, and the spool retainer. Refer to Spool Replacement earlier in this manual.

STORing the trimmer

Remove the battery pack from the string trimmer before storing.

Clean all foreign material from the trimmer.

Store it in a place that is inaccessible to children.

Keep away from corrosive agents such as garden chemicals and de-icing salts.

Spool

 

Retainer

tABS

 

SLOTS

 

SPOOL

eyelet

Fig. 15

WIND CLOCKWISE

Spool

HOLE

Fig. 16

Replacement Spool Part Number

AC14RSL

Replacement Spool Cap Part Number

AC14HC

14 — English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents Important Safety Instructions Read all instructionsModel Battery Pack Charger P113 Battery Pack Charger P110Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Tools NeededPacking List AssemblyUnpacking Attaching Grass DeflectorOperation TO Install Battery PackTo Remove Battery Pack Starting/stopping the string trimmerTelescoping Boom Coupler Loosen Tighten Adjustable Front HandleTelescoping Boom Knob Notches 1 and 2 Trimming EdgingCutting Area Best Cutting Area Operating the TrimmerCutting Tips CUT-OFF Blade Advancing StringAdvancing the String Manually Rotating rear HandleBattery Pack Removal and Preparation for Recycling MaintenanceGeneral Maintenance BatteriesSTORing the trimmer Spool ReplacementString Replacement See Figures 15Troubleshooting Problem Possible Cause SolutionWarranty Limited Warranty StatementEnglish English English Recortadora de hilo Manuel D’UTILISATION / Manual DEL OperadorTondeuse À Fouet

P2000 specifications

The Ryobi P2000 is a versatile and powerful cordless drill that caters to both DIY enthusiasts and professional users. It is part of Ryobi’s expanding 18V ONE+ system, which allows for compatibility with over 175 tools, making it a fantastic addition for anyone invested in this lineup.

One of the standout features of the P2000 is its robust motor that delivers a maximum speed of 1,600 RPM. This high-speed capability allows users to complete tasks quickly and efficiently. Coupled with a two-speed transmission, it offers a range of settings, making it suitable for both high-torque applications such as driving screws and lighter work like drilling into wood or metal.

The drill is equipped with a 1/2 inch keyless chuck that allows for easy bit changes without the need for additional tools. This feature is especially beneficial in time-sensitive situations, as it streamlines the workflow. Additionally, the P2000 includes 24 adjustable torque settings, which provide the flexibility to adapt to different materials and fasteners, ensuring proper fastening without stripping the screws.

Built with a rubberized overgrip, the P2000 ensures comfort and stability during prolonged use. The ergonomic design minimizes hand fatigue, which is particularly useful for extensive projects. Furthermore, the drill features an integrated LED light that illuminates the work area, allowing for better visibility in dark or tight spaces.

The Ryobi P2000’s compact and lightweight design enhances portability, making it easy to transport to various job sites. As part of the ONE+ system, it is powered by an 18V lithium-ion battery, which delivers longer run times and faster charging compared to traditional nickel-cadmium batteries. Users can also take advantage of the convenience of interchangeable battery packs across the Ryobi range.

In summary, the Ryobi P2000 is a well-rounded cordless drill that combines power, versatility, and user-friendly features. Its high RPM, adjustable torque settings, and ergonomic design, along with the reliable power of the ONE+ battery system, make it an excellent choice for both hobbyists and professionals seeking efficiency and durability in their tool selection. Whether you are assembling furniture, drilling holes, or tackling other home improvement projects, the P2000 delivers reliable performance and convenience.
Top Page Image Contents