Holding the Trimmer, Adjusting Trimming Line Length

OPERATING INSTRUCTIONS

HOLDING THE TRIMMER

WARNING: Always wear eye, hearing, foot and body protection to reduce the risk of injury when operating this unit.

Before operating the unit, stand in the operating position (Figs. 4 & 5). Check for the following:

•The operator is wearing eye protection and proper clothing.

•The right arm is slightly bent, and the hand is holding the shaft grip.

•The left arm is straight, and the hand is holding the J-handle or D-handle.

•The unit is at waist level.

•The cutting attachment is parallel to the ground and easily contacts the vegetation to be cut without the operator having to bend over.

Fig. 4

Fig. 5

ADJUSTING TRIMMING LINE LENGTH

The Bump Head™ cutting attachment allows you to release trimming line without stopping the engine. To release more line, lightly tap the cutting attachment on the ground (Fig. 6) while operating the trimmer at high speed.

NOTE: Always keep the trimming line fully extended. Line release becomes more difficult as cutting line becomes shorter.

Fig. 6

Each time the head is bumped, about 1 inch (25.4 mm.) of trimming line is released. A blade in the cutting attachment shield will cut the line to the proper length if excess line is released.

For best results, tap the Bump Head™ on bare ground or hard soil. If line release is attempted in tall grass, the engine may stall. Always keep the trimming line fully extended. Line release becomes more difficult as the cutting line becomes shorter.

NOTE: Do not rest the Bump Head™ on the ground while the unit is running .

CAUTION: Do not remove or alter the line cutting blade assembly. Excessive line length will make the clutch overheat. This may lead to serious personal injury or damage to the unit.

Some line breakage will occur from:

•Entanglement with foreign matter

•Normal line fatigue

•Attempting to cut thick, stalky weeds

•Forcing the line into objects such as walls or fence posts

TIPS FOR BEST TRIMMING RESULTS

•Keep the cutting attachment parallel to the ground.

•Do not force the cutting attachment. Allow the tip of the line to do the cutting, especially along walls. Cutting with more than the tip will reduce cutting efficiency and may overload the engine.

•Cut grass over 8 inches (200 mm) by working from top to bottom in small increments to avoid prema- ture line wear or engine drag.

•Cut from left to right whenever possible. Cutting to the right improves the unit's cutting efficiency. Clippings are thrown away from the operator.

•Slowly move the trimmer into and out of the cutting area at the desired height. Move either in a forward- backward or side-to-side motion. Cutting shorter lengths produces the best results.

•Trim only when grass and weeds are dry.

•The life of your cutting line is dependent upon;

•Following the previous trimming techniques

•What vegetation is being cut

•Where it’s being cut

For example, the line will wear faster when trimming against a foundation wall as opposed to trimming around a tree.

SS725r specifications

The Ryobi SS725R is a testament to the brand's commitment to innovation and user-friendly design in the power tool industry. This string trimmer, part of Ryobi's extensive lineup of lawn care equipment, is engineered for both residential and light commercial use, delivering efficiency and ease of operation for gardeners and landscapers alike.

One of the standout features of the SS725R is its potent 25cc engine, which provides the power needed to tackle tough vegetation. This engine is paired with a lightweight design, making the trimmer easy to maneuver while ensuring that users can operate it for extended periods without experiencing undue fatigue. The ergonomic design of the handle and overall weight distribution further contribute to the comfort and manageability of the tool.

The SS725R employs a bump-feed line advancement system, allowing users to quickly and easily extend the cutting line with a simple bump on the ground. This feature eliminates downtime spent on manual line feed adjustments, enhancing productivity and ensuring that operators can maintain a continuous workflow. The trimmer is equipped with a dual-line cutting mechanism, which effectively cuts through thick grasses and weeds, making it a reliable choice for various landscaping tasks.

Another notable characteristic of the Ryobi SS725R is its interchangeable attachment capability. This versatility allows users to utilize additional Ryobi attachments such as edgers, blowers, and cultivators, transforming the trimmer into a multi-functional tool that can handle a variety of outdoor chores. This flexibility is particularly beneficial for homeowners and professional landscapers looking to maximize their investment in outdoor equipment.

The SS725R also showcases Ryobi's commitment to ease of use with features such as easy starting technology, which reduces the effort needed to start the engine. This is complemented by a user-friendly fuel system that simplifies refueling and minimizes spills. Additionally, the trimmer’s durable construction ensures that it is built to withstand the rigors of regular use, with high-quality materials that provide longevity and reliability.

In conclusion, the Ryobi SS725R is a powerful and versatile tool that combines advanced technology with user-centric design. Its strong engine, efficient bump-feed system, ergonomic features, and compatibility with various attachments make it a worthy addition to any lawn care arsenal. Whether for routine lawn maintenance or tackling more challenging landscaping tasks, the SS725R stands out as a dependable choice for gardeners looking to achieve professional results with ease.