Before Operating, Safety Warnings for GAS Trimmers

RULES FOR SAFE OPERATION

• IMPORTANT SAFETY INFORMATION •

READ ALL INSTRUCTIONS

BEFORE OPERATING

•Read the instructions carefully. Be familiar with the controls and proper use of the unit.

•Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.

•Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.

•Inspect the unit before use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace cutting attachment parts that are cracked, chipped, or damaged in any way. Make sure the cutting attachment is properly installed and securely fastened. Be sure the cutting attachment shield is properly attached, and positioned as recom- mended. Failure to so can result in personal injury to the operator and bystanders, as well as damage to the unit.

•Use only 0.080 inch (2.03 mm) diameter genuine Ryobi replacement line. Never use metal-reinforced line, wire, or rope, etc.. These can break off and become a dangerous projectile.

•Be aware of the risk of injury to the head, hands and feet.

•Clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders and pets outside a 50 feet (15 m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the engine and cutting attachment immediately.

•Squeeze the throttle control and check that it returns automatically to the idle position. Make all adjustments or repairs before using unit.

•This unit was not designed to be used as a brushcut- ter. Do not attach or operate this unit with any type of brushcutting blade or brushcutting attachment.

SAFETY WARNINGS FOR GAS TRIMMERS

WARNING: Gasoline is highly flammable, and its vapors can explode if ignited. Take the following precautions:

•Store fuel only in containers specifically designed and approved for the storage of such materials.

•Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

•Mix and add fuel in a clean, well-ventilated area outdoors where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately.

•Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

•Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke, keep sparks and open flames from the area while adding fuel or operating the unit.

WHILE OPERATING

•Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1-1989 standards, and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty. Long sleeve shirts are recommended.

•Wear heavy, long pants, boots and gloves. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•The cutting attachment shield must always be in place while operating the unit. Do not operate unit without both trimming lines extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.

•This unit has a clutch. The cutting attachment remains stationary when the engine is idling. If it does not, have the unit adjusted by an authorized service technician.

•Adjust the assist handle to your size to provide the best grip.

•Be sure the cutting attachment is not in contact with anything before starting the unit.

•Use the unit only in daylight or good artificial light.

•Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. See Starting/Stopping Instructions.

•Use the right tool. Only use this tool for the purpose intended.

•Do not overreach. Always keep proper footing and balance.

•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.

770rEB specifications

The Ryobi 770rEB is a powerful and versatile brushcutter designed for both homeowners and professionals seeking an efficient tool to manage heavy vegetation and tough landscaping tasks. This model combines advanced technology with practicality to deliver impressive performance in various gardening applications.

At the heart of the Ryobi 770rEB is its robust 770W engine, which provides ample power for tackling dense undergrowth, thick grass, and challenging weeds. Its ergonomic design, coupled with a lightweight construction, ensures user comfort during extended periods of operation. The balance and handling of this brushcutter make it easy to maneuver, reducing fatigue and increasing productivity.

One of the standout features of the Ryobi 770rEB is its Easy Start technology. This innovation allows for a simplified starting process, so users can get to work without the frustration often associated with traditional pull-start engines. Additionally, the engine is designed with reduced vibrations, which minimizes strain on the operator’s hands and arms, enhancing overall comfort and control.

The cutting performance of the Ryobi 770rEB is further enhanced by its dual-line bump feed head, which allows for quick and easy line replacement. Users can effortlessly advance the cutting line simply by tapping the head on the ground, making it a user-friendly solution for maintaining a neat and tidy landscape. The 25.4cc 2-stroke engine offers high efficiency while keeping emissions low, adhering to environmental standards.

Moreover, the Ryobi 770rEB comes equipped with several cutting attachments, including blades for heavier brush and trees, providing adaptability for a variety of tasks. The inclusion of a shoulder harness enhances stability and adds comfort, allowing the user to distribute weight evenly during operation.

Building on durability, the Ryobi 770rEB features a sturdy construction that can withstand the trials of regular use. Its adaptable design ensures it meets the needs of various landscaping tasks, from trimming grass around flower beds to clearing overgrown areas.

In summary, the Ryobi 770rEB brushcutter stands out due to its powerful engine, ergonomic features, Easy Start technology, and versatility in handling different cutting tasks. Whether for home use or professional landscaping, it proves to be an essential tool for maintaining efficient and effective outdoor spaces.