Before Operating, While Operating

RULES FOR SAFE OPERATION

•Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this unit. Receptacles are available having built-in GFCI protection and may be used for this measure of safety.

•EXTENSION CORDS: Make sure your extension cord is in good condition. When using an extension cord, be sure to use a cord that is heavy enough to carry the current that your unit will draw. An undersized exten- sion cord will cause a drop in line voltage resulting in loss of power and overheating. The table shows the correct size to use depending on the cord length and nameplate amperage rating. If in doubt, use the next heavier size line gauge. The smaller the gauge num- ber, the heavier the cord. To reduce the possibility of disconnection of the unit from the extension cord dur- ing operation, see Fig. 5, page 9.

•A nameplate on your unit indicates what voltage it uses. Never connect the unit to an AC voltage that dif- fers from this voltage.

MINIMUM WIRE SIZE FOR EXTENSION CORDS

FOR 120 VOLT APPLIANCES

Cord length (ft)	25	50	100		150
Amperage Rating	Wire size (AWG)

1 to 10 amps	18	16	14		12
10 to 12 amps	16	16	14		12
12 to 16 amps	14	12		NOT

RECOMMENDED

BEFORE OPERATING

•Read the instructions carefully. Be familiar with the controls and proper use of the unit.

•Always remain alert. Use common sense. To prevent injury to yourself and others, do not operate this unit if you are fatigued.

•Do not operate the unit while under the influence of drugs, alcohol or medication.

•Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.

•Inspect the unit before use. Replace damaged parts. Make sure all fasteners are in place and secure. Replace cutting attachment parts that are cracked, chipped, or damaged in any way. Make sure the cutting attachment is properly installed and securely fastened. Be sure the cutting attachment shield is properly attached, and positioned as recommended. Failure to do so can result in personal injury to the operator and bystanders, as well as damage to the unit.

•Use only 0.080 inch (2.03 mm) diameter genuine Ryobi replacement line. Never use metal-reinforced line, wire, or rope, etc.. These can break off and become a dangerous projectile.

•Be aware of the risk of injury to the head, hands and feet.

•Clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting attachment. Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders and pets outside a 50 feet (15 m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the engine and cutting attachment immediately.

•This unit was not designed to be used as a brushcutter. Do not attach or operate this unit with any type of brushcutting blade or brushcutting attachment.

WHILE OPERATING

•Avoid unintentional starting. Do not carry plugged-in unit with your finger on the switch. Be sure switch is off when plugging in.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing pro- tection when operating this unit. Wear a face or dust mask if the operation is dusty.

•Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•The cutting attachment shield must always be in place while operating the unit as a trimmer. Do not operate unit without both trimming lines extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.

•Adjust the assist handle to your size to provide the best grip.

•Be sure the cutting attachment is not in contact with anything before starting the unit.

•Use the unit only in daylight or good artificial light.

•Use the right tool. Only use this tool for the purpose intended.

•Do not overreach. Always keep proper footing and balance.

•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.

•Do not force unit. It will do the job better and with less likelihood of injury at a rate for which it was designed.

•Always stop the unit when operation is delayed or when walking from one work location to another.

•If you strike or become entangled with a foreign object, stop the unit immediately and check for damage. Do not operate before repairing damage. Do not operate the unit with loose or damaged parts.

130rEB specifications

The Ryobi 130rEB is a robust and versatile tool designed for homeowners and gardening enthusiasts who require an efficient and reliable trimmer for their outdoor spaces. This model stands out due to its balance of power, ease of use, and innovative technologies, making it a favorite among users looking to maintain their lawns and gardens with precision.

One of the prominent features of the Ryobi 130rEB is its powerful 30cc, 2-cycle engine. This engine provides ample power for tackling overgrown grass and weeds, ensuring that users can handle challenging lawn maintenance tasks with ease. The engine is designed for reliability and performance, allowing for robust operation without compromising fuel efficiency.

In terms of technology, the Ryobi 130rEB incorporates a unique Easy Start system. This feature significantly reduces the effort required to start the engine, allowing users to get to work quickly without the frustration of traditional pull-start mechanisms. The easy starting capability is especially beneficial for those who may not have experience operating gas-powered machinery.

The Ryobi 130rEB also emphasizes user comfort and control. Its ergonomic design includes a comfortable handle that minimizes fatigue during extended use. Additionally, it features a lightweight construction, making it easy to maneuver and ensuring improved handling in various cutting positions. This is particularly appreciated by users who often spend extended periods trimming their hedges and performing lawn care tasks.

Another notable characteristic is the advanced string head, which utilizes a bump feed mechanism. This allows users to easily release more line whenever it’s needed, ensuring continuous operation without interruptions. The .095-inch line diameter provides a perfect balance between durability and cutting efficiency, allowing the trimmer to tackle tough vegetation.

Moreover, the Ryobi 130rEB has a versatile split shaft design. This allows for easy attachment of various accessories, turning the trimmer into a multi-functional tool for different gardening needs. From brush cutting to edging, the 130rEB can adapt to any task, making it a valuable addition to any home garden toolkit.

Overall, the Ryobi 130rEB embodies a powerful combination of convenience, efficiency, and user-friendliness. With its emphasis on innovative technology and thoughtful design, it remains a leading choice for those who value quality and performance in their gardening equipment. Whether you are a seasoned gardener or a novice, the Ryobi 130rEB promises to deliver exceptional results for all your trimming needs.