Ryobi 105r, 132r, 137r manual Releasing the Inner Reel, Cleaning the Speedspool

Page 12

MAINTENANCE AND REPAIR INSTRUCTIONS

4.Pull the line away from the spool until the line is tight against the inner reel (Fig. 20).

RELEASING THE INNER REEL

If the speed spool does not operate correctly when bumping the head on the ground, use the following instructions.

1.Pull the ends of the line firmly away from the spool to release the inner reel (Fig. 23). If this procedure does not release the inner reel, follow the “Cleaning the SpeedSpool” instructions below.

Fig. 20

5.Repeat the procedure with the second eyelet and use the same amount of line as specified in Step 2.

6.Wind the inner reel counterclockwise until approximately four (4) inches of line remains outside of the eyelets in the outer spool (Fig. 21).

Fig. 21

7.If winding the line becomes difficult or the line jams, pull the ends of the line away from the spool and continue winding the inner reel counterclockwise (Fig. 22).

Fig. 23

CLEANING THE SPEEDSPOOL

If the SpeedSpool becomes difficult to wind or does not operate correctly when bumping the head on the ground, use the following instructions.

1.If you need to remove the Bump Knob to clean the spool or remove jammed, excess line, hold the outer spool, and unscrew the Bump Knob counterclockwise (Fig. 24).

TO INSTALL NEW TRIMMING LINE, IT IS NOT NECESSARY TO REMOVE THE BUMP KNOB.

Fig. 24

Fig. 22

12

Image 12
Contents OPERATOR’S Manual Table of Contents IntroductionSafety Warnings Electrical Safety WarningsBefore Operating While OperatingOther Safety Warnings Safety and International Symbols USAAssembly Instructions Installing the D-HANDLEAdjusting the D-HANDLE Installing the String Guard Models 105r and 132rConnecting the Cord Operating InstructionsStarting the Trimmer Stopping the TrimmerOperating the TWO-SPEED Switch Adjusting the Trimming Line Length Decorative TrimmingEdging Models 132r and 137r Maintenance and Repair Instructions Line Installation for SpeedspoolCorrect Line to USE TOP View of the SpeedspoolCleaning the Speedspool Releasing the Inner ReelBump Knob Foam Seal Spring Assembly Inner Reel Installing a Prewound ReelShaft Maintenance Repair Instructions SpecificationsTroubleshooting Cleaning the TrimmerPage Limited TWO-YEAR Warranty REV. B

105r, 132r, 137r specifications

The Ryobi 105R, 132R, and 137R are popular string trimmers designed for both homeowners and professionals, each offering unique features and capabilities that cater to various landscaping needs.

The Ryobi 105R is a lightweight and easy-to-use trimmer ideal for small to medium-sized yards. Weighing just over 10 pounds, it provides excellent maneuverability, making it suitable for those who may struggle with heavier tools. The 105R features a 26cc two-stroke engine that delivers sufficient power for most trimming tasks. It comes equipped with a 0.080-inch line, which is adequate for cutting through grass and lighter weeds. One standout feature of the 105R is its anti-vibration design, which reduces user fatigue during extended periods of use. The spool is easy to replace, thanks to its quick-load system, allowing users to spend less time on maintenance and more time on trimming.

Moving up the line, the Ryobi 132R offers a more robust solution, featuring a 31cc two-stroke engine that provides increased power for tackling tougher jobs. The 132R also includes a full bump feed head, allowing for easy line advancement with a simple bump on the ground. This model is particularly valuable for homeowners with larger properties or those who require a reliable tool for more demanding landscaping tasks. Its ergonomic design and lightweight construction enable users to operate it comfortably for extended periods. The 132R also incorporates a straight shaft, which allows for better reach in tight spaces and under bushes.

The Ryobi 137R takes performance a step further, combining a powerful 32cc engine with enhanced features suitable for both residential and commercial use. The 137R excels with its superior cutting ability, equipped with a 0.095-inch dual line for tackling thicker vegetation and more challenging weeds. This model also boasts Ryobi's patented Speed Feed technology, enabling quick and easy line loading without the mess of traditional spools. The combination of a straight shaft and a comfort grip handle further enhances control and precision when trimming around flower beds and fences.

In summary, the Ryobi 105R, 132R, and 137R each provide a range of features to accommodate different users' needs, from casual homeowners to serious landscapers. Their innovative technologies and user-friendly designs are key attributes that set them apart in the competitive market of string trimmers, ensuring ease of use and optimal performance for various landscaping tasks. With Ryobi's reputation for reliability and efficiency, these models remain top choices for anyone looking to maintain their outdoor spaces effectively.