6
equipment
warning
Use this attachment with ECHO approved models only. Serious injury may result from the use of this attachment combined with a non approved ECHO product.
•Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
•Inspect shield for damage and ensure that the
•Check that the cutting attachment is firmly attached and in safe operating condition.
•Check that front loop handle and shoulder strap/ or shoulder/waist harness are adjusted for safe, comfortable opera- tion. See Assembly Section for proper adjustment.
NOTE
ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.
Description
Locate this safety decal on your unit. Make sure the decal is legible and that you understand and follow the instructions on it. If the decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instruc- tions for specific information.
Shaft Decal
1
4
2 
3