Echo HC-165/185 specifications Long Term Storage Over 30 Days

Page 31

HC-165/185

STORAGE

STORAGE

The muffler and surrounding cover become hot during operation. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.

Long Term Storage (Over 30 Days)

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following:

1. Store unit in a dry, dust free place, out of the reach of children.

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.

Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark, otherwise serious personal injury may result.

2.Place the stop switch in the “STOP” position.

3.Remove accumulation of grease, oil, dirt and debris from exterior of unit.

4.Perform all periodic lubrication and services that are required.

5.Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.

6.Install blade cover on blades.

7.Tighten all the screws and nuts.

8.Drain fuel tank completely. Press purge bulb 6 -7 times to remove remaining fuel from carburetor then drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.

9.Allow the engine to cool, then emove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

a.Place a clean cloth over the spark plug hole.

b.Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.

c.Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there.

10.Install the spark plug (do not connect ignition cable).

Always store and transport hedge clippers in a stable, horizontal position. Support gear case and cutting blades to prevent excessive flexing, which may cause damage to these components. Always install blade cover when transporting or storing unit.

X7502255307

31

© 9/2013 ECHO Inc.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operator’s Manual Table of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information Personal Condition and Safety Equipment International SymbolsPhysical Condition Hearing Protection Eye ProtectionHand Protection Breathing ProtectionRepetitive Stress Injuries Vibration and ColdEquipment HC-165/185 EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Remove Blade Guard AssemblyInstall Blade Guard Handling Fuel OperationFuel Fuel RequirementsAfter use Purge Bulb Starting Cold EngineStopping Engine Starting Warm EngineRotating Throttle Handle Rotating OperationHedge Trimming Maintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugExhaust System Exhaust Port CleaningSpark Arrestor Screen Engine Break-In Carburetor AdjustmentHigh Altitude Operation Blades LubricationGear Box Sharpening Level BladesAdjustment Level Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements HC-165/185

HC-165/185 specifications

The Echo HC-165/185 is a powerful and versatile hedge trimmer designed for both professional and home landscaping enthusiasts. Built with innovative technology and user-centric features, this model exemplifies Echo's commitment to quality and performance in outdoor power equipment.

One of the standout characteristics of the Echo HC-165/185 is its robust engine. Equipped with a high-performance 21.2 cc engine, it delivers a remarkable power-to-weight ratio that enhances maneuverability while tackling tough hedges and shrubs. Despite its potent engine, the unit is designed for quiet operation, an essential feature for residential areas.

The cutting performance is another highlight, with dual reciprocating blades that ensure efficient trimming. The HC-165 features 20-inch blades, while the HC-185 has slightly longer 24-inch blades, both designed for swift cutting of branches and thick foliage. This dual-sided design enables operators to achieve a clean, professional finish, allowing them to trim from either side without having to reposition frequently.

An ergonomic design plays a significant role in the overall usability of the HC series. The hedge trimmer is equipped with an anti-vibration system that minimizes operator fatigue during extended use. Additionally, the adjustable handle ensures a comfortable grip for users of varying statures, making it easier to reach high or low areas without straining.

Another innovative technology incorporated in the Echo HC-165/185 is the Easy Start system, which simplifies the starting process. This system reduces the effort required to start the engine, enabling users to get to work quickly without unnecessary frustration.

Durability and maintenance are also priorities in the design of the HC-165/185. The trimmer's construction features a high-quality build that can withstand the rigors of frequent use, while easy access to the air filter and spark plug simplifies maintenance tasks.

Overall, the Echo HC-165/185 combines power, efficiency, and user-friendly features, making it a top choice for those looking to maintain their landscapes with ease and effectiveness. Whether you’re a professional landscaper or a dedicated homeowner, this hedge trimmer aims to deliver superior performance and reliability, helping you achieve beautifully manicured hedges year-round.
Top Page Image Contents