Echo HC-235 manual

Page 8

8

1.BLADES - Double reciprocating single side blades mounted to a blade support bar.

2.SUPPORT HANDLE WITH GUARD - FOR RIGHT HAND - Rubber non-slip grip, guard protects hand from the blades. Warning decals are located on guard.

3.SPARK PLUG - Provides spark to ignite fuel mixture.

4.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

5.CHOKE - The choke control lever is located on the front of the air cleaner case. Move choke lever to "COLD START" () to close the choke for Cold Starting. Move choke lever to "RUN" () position to open choke.

6.AIR CLEANER - Contains replaceable filter element.

7.FUEL TANK CAP - Covers and seals fuel tank opening.

8.FUEL TANK - Contains fuel and fuel filter.

9.THROTTLE HANDLE - FOR LEFT HAND - Contains the Stop Switch, Throttle Lockout, and Throttle Trigger.

10.THROTTLE TRIGGER - Spring loaded to return to idle when released. Trigger Lockout must be depressed fully before Throttle Trigger will move. During acceleration, depress gradually for best operating technique.

11.STOP SWITCH - "SLIDE SWITCH" mounted on top of the rear handle. Move switch FORWARD to RUN, BACK to STOP.

12.THROTTLE TRIGGER LOCKOUT - This lever must be depressed before Throttle Trigger can be activated.

13.Spark arrestor muffler or spark arrestor muffler with catalyst -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

14.RECOIL STARTER HANDLE - Pull handle slowly until recoil starter engages, then quickly and firmly. DO NOT pull rope all the way out or allow the handle to snap back, damage to the starter will occur.

15.BLADE COVER - Used to cover blades during transportation or storage. Remove blade cover before using unit.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Hedge Clipper Safety manual Table of ContentsIntroduction Operators manualSafety Manual safety symbols and important information International symbolsPhysical Condition Eye ProtectionHand Protection Hearing ProtectionRepetitive Stress Injuries EPA 2010 and Later and/or C.A.R.B. Tier Equipment checkEmission Control exhaust & evaporative Right Front Handle Guard Hot Decal near muffler DescriptionPage Contents AssemblyFuel Requirements OperationFuel Handling Fuel Mixing InstructionsStarting cold engine Purge BulbStarting warm engine Stopping engineMaintenance Hedge trimmingMaintenance intervals Skill levelsAir filter Fuel filterSpark plug Cooling systemSpark Arrestor Screen Exhaust systemCarburetor adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationParts required None Blades LubricationGear Box Assembly Sharpening bladesBlade adjustment Troubleshooting Engine Problem Troubleshooting ChartLong Term Storage over 30 days StorageSpecifications Model HC-235Warranty Statements Exceptions99922201032 11/18/2011 Hedge Clipper Operators Manual Page Hedge Clipper Operators Manual Service Warranty registration Additional or replacement manualsServicing Information parts/serial number Echo consumer product support

HC-235 specifications

The Echo HC-235 is a powerful and efficient hedge trimmer designed for both residential and professional landscaping tasks. It incorporates advanced technologies and features that make it a standout choice for anyone looking to maintain their gardens and hedges effectively.

One of the key features of the Echo HC-235 is its robust engine. The trimmer is powered by a 21.2 cc professional-grade two-stroke engine that delivers reliable performance and exceptional cutting power. This engine provides ample torque, allowing users to tackle dense foliage and tough branches with ease. The lightweight design, weighing in at just under 11 pounds, enhances maneuverability, which is crucial for extended trimming sessions.

The HC-235 is equipped with a dual reciprocating blade system that measures 24 inches in length. The blades are crafted from high-quality steel, ensuring durability and long-lasting sharpness. The dual-action design reduces vibration during operation, making cuts smoother and increasing overall comfort for the user. Additionally, the trimmer’s blades are designed to cut branches up to 3/4 inch in diameter, making it a versatile tool for various hedging tasks.

In terms of user convenience, the Echo HC-235 features an ergonomic handle design that allows for multiple grip positions. The rotating handle provides additional flexibility when trimming at different angles, enhancing user control and comfort. Furthermore, the trimmer comes with anti-vibration technology, which helps minimize fatigue during prolonged use, making it ideal for both homeowners and professionals alike.

Another notable aspect of the HC-235 is its easy-start system, which minimizes the effort required to start the engine. This feature is particularly beneficial for those who may not have extensive experience with gas-powered tools. The trimmer also includes a heavy-duty air filtration system that prolongs engine life by keeping dirt and debris out, thus reducing maintenance time and costs.

Overall, the Echo HC-235 hedge trimmer combines power, efficiency, and user-friendly design, making it an excellent option for maintaining hedges, shrubs, and bushes. With its range of features and reliable performance, it is well-suited for anyone looking to achieve professional-quality results in their landscaping endeavors. Whether you’re a seasoned gardener or a homeowner wanting to spruce up your outdoor space, the HC-235 stands out as a reliable and effective tool.
Top Page Image Contents