Echo X7502026001, X750018671, SRM-266S manual Fuel Requirements

Page 14

14

fuel

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

WARNING

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alco- hol) is NOT approved.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. Echo brand premium Power BlendX TM Universal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD certified oil, such as Echo premium Power BlendX TM, will void the two-stroke engine warranty.

IMPORTANT

Echo premium Power BlendX TM Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo en- gines sold in the past regardless of ratio specified in those manuals.

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

Use an approved fuel container.

DO NOT smoke near fuel.

DO NOT allow flames or sparks near fuel.

Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

NEVER refuel a unit when the engine is HOT or RUNNING!

DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

DO NOT overfill fuel tank. Wipe up spills immediately.

Securely tighten fuel tank cap and close fuel container after refueling.

Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

Move at least 3m (10 ft.) from refueling location before starting the engine.

Image 14
Contents Grass Trimmer/Brush Cutter Introduction Safety manualTable of Contents Operators manualPersonal condition and safety equipment Safety Manual safety symbols and important informationInternational symbols Grass Trimmer/Brush Cutter3 Operators ManualHand Protection Physical ConditionEye Protection Hearing ProtectionGrass Trimmer/Brush Cutter5 Operators Manual EPA 2010 and Later and/or C.A.R.B. Tier EquipmentEmission Control exhaust & evaporative Hot Decal near muffler Grass Trimmer/Brush Cutter7 Operators ManualDescription Shaft DecalPage Grass Trimmer/Brush Cutter9 Operators Manual ContentsAssembly Plastic shield installation Remove nylon line head Nylon line head installationTo advance trimmer line Operation Front handle installationGrass Trimmer/Brush Cutter11 Operators Manual Operation with blades Preparing the Trimmer/Brush Cutter for Blade UseGrass Trimmer/Brush Cutter13 Operators Manual Choosing the Correct BladeFuel Fuel RequirementsGrass Trimmer/Brush Cutter15 Operators Manual Mixing InstructionsStarting cold engine Purge BulbStopping engine Grass Trimmer/Brush Cutter17 Operators ManualStarting warm engine Skill levels MaintenanceMaintenance intervals Fuel filter Grass Trimmer/Brush Cutter19 Operators ManualAir filter Foam Pre-filterSpark plug Cooling systemSpark Arrestor Screen Grass Trimmer/Brush Cutter21 Operators ManualExhaust system Exhaust Port Cleaning Engine Break-In Carburetor adjustmentGrass Trimmer/Brush Cutter23 Operators Manual High Altitude OperationDrive Shaft SRM-266 Only Gear HousingLubrication SRM-266S OnlyGrass Trimmer/Brush Cutter25 Operators Manual Nylon line disassembly instructionsNylon line replacement Sharpening metal blades Grass Trimmer/Brush Cutter Operators Manual Long Term Storage over 30 days StorageSpecifications Grass Trimmer /Brush Cutter Operator s ManualWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories Grass Trimmer/Brush Cutter31 Operators Manual01/2010 Grass Trimmer/Brush Cutter33 Operators Manual Page Grass Trimmer/Brush Cutter35 Operators Manual Additional or replacement manuals ServiceWarranty registration Servicing Information parts/serial number

SRM-266, SRM-266S, X750018671, X7502026001 specifications

The Echo X7502026001 and X750018671, along with the SRM-266S and SRM-266, represent a remarkable suite of outdoor power equipment that showcases innovative technologies and user-friendly features. These products cater to both professional landscapers and homeowners, providing robust performance in various landscaping tasks.

Starting with the Echo X7502026001, this model stands out due to its powerful engine that delivers exceptional cutting power. It is equipped with a high-efficiency two-stroke engine, ensuring that users can tackle tough jobs with ease. This feature not only enhances performance but also improves fuel efficiency. Additionally, the user-friendly design includes an ergonomic handle that minimizes operator fatigue during prolonged use.

The X750018671, often used in combination with Echo's cutting equipment, is designed to optimize performance and extend the life of the tools. This accessory is known for its durability and precision, making it an excellent choice for those who demand high-quality results.

On the other hand, the SRM-266S and SRM-266 are arming users with innovative technologies that enhance their trimming and cutting experience. The SRM-266S, with its lightweight body, allows for greater maneuverability without compromising power. The engine is designed for easy start, thanks to Echo’s i-30 starting system, which reduces the amount of effort needed to pull the starter rope.

In terms of cutting capability, both the SRM-266S and SRM-266 are equipped with a high-capacity fuel tank and a wide cutting swath, greatly increasing productivity. The two-step air filtration system ensures optimal engine performance by keeping dirt and debris out, extending the overall lifespan of the equipment.

Both models also feature a curved shaft design, allowing users to reach tight spots with ease. This is complemented by a variety of compatible cutting attachments and accessories, which can be easily swapped out for enhanced versatility.

In conclusion, the Echo X7502026001, X750018671, SRM-266S, and SRM-266 represent the pinnacle of outdoor power equipment. With their powerful engines, user-friendly features, and advanced technologies, they are designed to efficiently meet the demanding needs of any landscaping job. Whether for professional use or DIY projects, these models deliver on performance, durability, and ease of use, making them an excellent investment for gardening enthusiasts and professionals alike.