torscreenIfyouoperateinalocale.
wheresuchregulationsexist,youare legallyresponsibleforinstallingand maintainingtheoperatingconditionof thesepartsFailuretodosoisaviola.- tionoflawContactSearsService. Centerforthecorrectparts.
SPECIALNOTICE:Exposureto vibrationsthroughprolongeduseof gasolinepoweredhandtoolscould causebloodvesselornervedamage inthefingers,hands,andjointsof peoplepronetocirculationdisorders abnormalswellingsProlongedusein.
CARTONCONTENTS Checkcartoncontentsagainstthefol- lowinglist.
Model 358.798210
•Trimmer
•Shield
•Wing Nut (screwed onto shield)
•Container of Oil
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find parts missing or damaged, call
It is normal for the fuel filter to rattle in the empty fuel tank.
Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.
coldweatherhasbeenlinkedtoblood vesseldamageinotherwisehealthy peopleIfsymptomsoccursuchas. numbness,pain,lossofstrength, changeinskincolorortexture,orloss offeelingthefingers,hands,or joints,discontinuetheuseofthistool andseekmedicalattentionAnanti.- vibrationsystemdoesnotguarantee theavoidanceoftheseproblemsUs.- erswhooperatepowertoolsonacon- tinualandregularbasismustmonitor closelytheirphysicalconditionandthe conditionofthistool.
•Rotate the handle on the tube to an upright position; retighten wing nut.
ATTACHING SHIELD
WARNING:The shield must be prop- erly installed. The shield provides partial protection from the risk of thrown objects to the operator and others and is equipped with a line limiter which cuts excess line to the proper length. The line limiter (on underside of shield) is sharp and can cut you. For proper orientation, see illustration in Operation section.
•Remove wing nut from shield.
•Insert bracket into slot as shown.
•Pivot shield until bolt passes through hole in bracket.
•Securely tighten wing nut onto bolt.
ASSEMBLY
WARNING:If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.
ADJUSTING THE HANDLE
WARNING:When adjusting the han- dle, be sure it remains between the trigger and the safety label.
• Loosen wing nut or knob on handle.
Shield
Slot
,J
Bracket
Wing
Nut