Black & Decker NST1118 quick start Place battery on charge, Install the handle, Install the guard

Page 1

QUICKSTARTGUIDE - NST1118/

ST2118

 

RECHARGEABLE18VOLTNiCd STRINGTRIMMER

 

1) Unpack components and verify contents. NST118/NST2118 contains (1) trimmer, (1) black handle, (1) guard, (1) battery (NST1118),

(2) batteries (NST2118) and (1) charger. NOTE: NST1118contains one battery.

 

A

2) Place battery on charge.

 

 

9 hours

Important: Charge battery pack for at least 9 hours to ensure a full charge is delivered to the battery. During charging the

green LED will appear. When charging is complete the green LED will go off.

 

 

9 heures

3) Install the handle.

 

 

9 horas

Important: The black auxiliary handle must be installed with the

B1

B2

B3

Black & Decker logo facing up.

• Press in on the buttons on both sides of the upper housing (B1).

• Partially push the handle on so that it will hold the buttons in when you

 

 

 

release them with your hand (B2).

 

 

 

• Push the handle completely onto the housing and position it slightly until it

 

 

 

“snaps” into place (B3).

 

 

 

Note: If the handle is installed upside down, the adjustment button will not

 

 

 

engage. To remove the handle, insert a nail or screwdriver into the small hole

 

 

 

on the side of the handle, push in the spring loaded button on the opposite

 

 

 

side of the handle, and remove the handle from the trimmer body.

 

 

C3

4) Install the guard.

 

 

Turn the trimmer upside down so that you are looking down at the spool cap.

 

 

 

• Turn the guard upside down and slide it onto the orange tab below the

 

 

 

motor housing as shown (C1). Make sure the tabs on the guard engage the

 

 

 

ribs on the motor housing as shown in C2.

 

 

 

• Continue to slide the guard on until you hear it “snap” into place.

 

 

 

• Using a phillips screwdriver, insert the guard screw to complete the guard

 

 

 

assembly (C3).

 

 

 

5) Remove the tape from the line and cutting blade on the guard.

 

 

 

6) Adjust the mode and height.

 

 

 

Important: The trimmer ships in the box set in the edging mode.

 

 

 

• To switch the trimmer back into trimming mode, loosen the black collar lo-

 

 

 

cated at the top of the aluminum pole (D1).

 

 

 

• Rotate the pole 180°. There is a position stop at 180° to indicate you are in

 

 

 

trimming mode (D2).

 

 

 

• You may also adjust the height of the trimmer to a comfortable operating

 

 

 

height when the collar is loose (D3).

 

 

 

• Tighten the collar when the trimmer is at the desired height and mode.

 

 

 

 

Edge mode

Trim mode

 

 

Mode de coupe-

Mode de taillage

 

 

bordures

Modo de poda

 

 

Modo de bordeado

 

 

7) Once the battery is charged, slide the battery into the trimmer area as shown.

E

 

 

 

 

8) Depress the lock off button (as shown here) in either direction and simultaneously pull the trigger.

F

 

You do not need to continue to depress the lock off button during operation.

 

If you have additional questions or need help, please call Black & Decker at 1-800-544-6986from

 

 

8 a.m. to 5 p.m. EST Mon. - Fri.

1

2

Please check instruction manual for full instructions and warnings.

 

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Install the handle Place battery on chargeInstall the guard Poser la poignée Charger le bloc-pilesPoser le pare-main Ponga a cargar la batería
Related manuals
Manual 44 pages 9.5 Kb

NST1118 specifications

Black & Decker has long been recognized as a leader in the power tools and outdoor equipment market, and their latest range of cordless tools continues this tradition of quality and innovation. Among the standout products are the BDCD220RSR, NST2118, NST1118, NST1118R, and NST2118R, each designed to meet the diverse needs of consumers and professionals alike.

The Black & Decker BDCD220RSR is a versatile 20V MAX cordless drill/driver that boasts a lightweight, compact design for easy handling. Its powerful lithium-ion battery ensures extended runtime and quick charging, allowing users to complete tasks without frequent interruptions. The drill features an 11-position clutch that helps to prevent stripping and overdriving screws, making it suitable for both wood and metal applications. Additionally, the integrated LED work light illuminates the workspace, enhancing visibility in dim conditions.

Moving on to the NST2118 and NST1118 series, these models focus on outdoor maintenance, particularly hedge trimming and grass cutting. The NST2118 is an 18V MAX cordless hedge trimmer equipped with dual-action blades that provide faster trimming and a cleaner cut. Its lightweight design reduces user fatigue, while the wrap-around handle allows for comfortable, multi-directional cutting. The included battery provides sufficient power for extended trimming sessions without the hassle of cords.

In contrast, the NST1118 and NST1118R are lightweight string trimmers designed for ease of use and efficiency. The NST1118 features a 20V MAX battery that ensures high performance, while the NST1118R offers a push-button feed system for quick line advancement without the need for manual adjustments. Both models combine power and precision for effortless trimming around edges and borders, catering to homeowners and landscapers alike.

Another noteworthy characteristic of these Black & Decker tools is their emphasis on user-friendly technology. Each model incorporates ergonomic grips to enhance comfort during prolonged use, reducing strain on the hands and wrists. Moreover, the tools are designed for easy maintenance, with simple mechanisms for replacing batteries and clearing line jams.

In summary, the Black & Decker BDCD220RSR, NST2118, NST1118, NST1118R, and NST2118R represent a commitment to quality, efficiency, and user-centered design. With their powerful performance, innovative features, and reliable battery technology, these tools are ideal choices for anyone looking to elevate their DIY or gardening projects.
Top Page Image Contents