Craftsman 172.74815 warranty Maintenance, Accessories

Page 14

MAINTENANCE

!WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage.

!WARNING: To avoid injury, ALWAYS turn trimmer off and disconnect the battery from the trimmer BEFORE installing parts or cleaning the trimmer or making any adjustments.

GENERAL MAINTENANCE

Keep your trimmer clean and in good repair for maximum long-lasting performance. Check for damaged, missing, or worn parts. Check for loose screws, misalignment, moving parts that are jammed, or any other conditions that may affect the operation.

If abnormal vibration or noise occurs, turn off the tool immediately and have the problem corrected before further use. DO NOT use the trimmer if it has any broken parts.

Have damaged, missing, worn or broken parts replaced before using trimmer.

CLEANING

!WARNING: To avoid injury, ALWAYS turn trimmer off and disconnect the battery from the trimmer BEFORE installing parts or cleaning the trimmer or making any adjustments.

!WARNING: To avoid damage or electric shock, DO NOT use strong solvents or detergents on the plastic housing or plastic components. Certain household cleaners may damage plastic and may also cause a shock hazard.

Wipe the outside of the trimmer with a dry, soft cloth. DO NOT hose down or wash the trimmer with water. Scrape the guard and spool area to remove dried clippings and mud. Brush or blow dust, debris and grass clippings out of the air vents. Keep the vents free of obstruction.

ACCESSORIES

!WARNING: The use of attachments or accessories that are not recommended for this tool might be dangerous and could result in serious injury. Do not attempt to use fishing line or other lines that are not recommended.

CUTTING LINE

Replace the cutting line ONLY with 0.065 inch (1.65 mm) twisted (helical or spiral) shaped, not round, line for auto feed. Craftsman Professional 0.065-in. replacement trimmer line, 71-85760, in packs of 40ft., is recommended.

SPOOL

Replace the spool with a new pre-wound spool (Craftsman Automatic Feed Spool 71-85937). Line and spools are available at Sears Stores or other Craftsman outlets.

BATTERY PACKS

Replacement or extra battery packs are available at your nearest Sears Parts and Repair Service Centers. See part number on PARTS LIST.

Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.

26

ACCESSORIES cont.

!WARNING: To avoid injury, ALWAYS remove the battery from the trimmer BEFORE installing parts or cleaning the trimmer or making any adjustments.

BATTERY CARE

The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing. The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

1.Remove the battery pack from the charging stand once it is fully charged and ready for use.

For battery storage longer than 30 days:

• Store the battery pack where the temperature is below 80°F

• Store battery packs in a “discharged” condition

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and / or disposal options.

!WARNING: Upon removal, cover the battery pack’s terminals with heavy- duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and / or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and / or serious injury.

CONTAINS NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY. SEE OPERATORS MANUAL

27

Image 14
Contents Weedwacker Cordless Trimmer Safety Symbols Table of ContentsModel Charging Stand Battery Pack Safety InstructionsSafety Instructions 71-74815 CGT 183UA-48 C1817A005 CGT 183 UA-42 WA3127Service Safety Injury and damage Important WarningOr damage Save These INSTRUCTIONS. Refer to them frequently and use Unpacking FigSerious personal injury Make sure they have these instructions alsoKnow Your Cordless Trimmer Fig DescriptionDescription Know Your Cordless Trimmer cont. FigCharging a HOT Battery Pack Assembly & AdjustmentsAssembly & Adjustments Edge Guide Fig Installing the Battery Pack FigInstalling the Safety Guard Figs and 5a Adjusting the Auxiliary Handle a Adjusting the Height Figs and 8aAdjusting the Cutting Angle Fig Attaching the Auxiliary Handle and 7aTo USE Trimmer for Edging OperationOperation Rotate Rear Handle and Upper ShaftRemove the Spool Replace the SpoolBattery Pack Information Charging Stand and Battery Pack cont. Figs , 22, 22aCharging Stand and Battery Pack Figs , 22, 22a Brackets for Cordless TrimmerAccessories MaintenanceAccessories Parts List 12-in.WeedwackerCordless TrimmerGet it fixed, at your home or ours
Related manuals
Manual 16 pages 17.35 Kb

172.74815 specifications

The Craftsman 172.74815 is a versatile and reliable tool that caters to both DIY enthusiasts and seasoned professionals. Designed to provide exceptional performance, this model boasts several features and technologies that set it apart in the crowded market of power tools.

One of the main features of the Craftsman 172.74815 is its powerful motor, delivering efficient and consistent performance for a variety of tasks. The robust motor enables users to tackle tough materials with ease, whether it's cutting, drilling, or sanding. This model is particularly praised for its ability to maintain speed under load, ensuring that projects progress smoothly without frustrating interruptions.

In terms of ergonomics, the Craftsman 172.74815 is designed with user comfort in mind. The tool features a lightweight construction that reduces fatigue during extended use, allowing for more productive work sessions. Its non-slip grip provides a secure hold, enhancing control and precision as users work on their projects.

Technology plays a significant role in the effectiveness of the Craftsman 172.74815. The tool incorporates innovative features such as adjustable speed settings, allowing users to customize the tool's performance based on the specific requirements of their tasks. This level of control is essential for achieving the best results, whether for delicate work or more heavy-duty applications.

Safety is another key consideration in the Craftsman 172.74815 design. The unit includes built-in safety features such as an electronic brake that quickly stops the tool's operation, minimizing the risk of accidents. Additionally, the dust-collecting capabilities help keep the workspace clean and free from debris, creating a better working environment.

Durability is a hallmark of the Craftsman brand, and the 172.74815 is no exception. Constructed with high-quality materials, this tool is built to withstand the rigors of frequent use. The attention to detail in its design ensures longevity, making it a wise investment for those looking to expand their toolkit.

In conclusion, the Craftsman 172.74815 stands out as a reliable and efficient tool for a wide range of applications. Its powerful motor, ergonomic design, adjustable speeds, and focus on safety make it a fantastic choice for anyone in need of a dependable power tool. Whether you are a weekend warrior or a professional contractor, the Craftsman 172.74815 is designed to meet your needs and help you achieve your project goals with ease.