S o l u t e f i d e l i t y | Genesis Advanced Technologies S4/8

a b s o l u t e f i d e l i t y ™

RCA or balanced XLR “LFE IN” connector on the S4/8. Do not use both of these inputs at the same time.

We recommend that single-ended interconnects be no longer than 10 feet (3m). Hence, we have provided balanced LFE inputs. If your processor is further than 10 feet from the S4/8, please use a high- quality balanced cable.

If your processor has only single-ended outputs and is further than 10 feet from the S4/8, we recommend that you consider using an active (or passive) signal balancing device to convert the unbalanced output signal from your processor to a truly balanced signal. A truly balanced signal will give you the benefit of maximum noise rejection and maximum signal fidelity over long cable runs.

The unbalanced interconnect which connects your preamp to the balancing device should be shorter than 4.5 feet (1.5 meters). You can then use a balanced interconnects to connect the output of the signal- balancing device to the input of the S4/8.

An added benefit of the S4/8 is that the servo-amplifier incorporates an active signal-balancing device built in. This means that if your processor has only single-ended outputs, but you can place an S4/8 close enough to use a single-ended interconnect, then the balanced output of that S4/8 can be used to daisy chain to the rest of the system.

LFE Gain

The S4/8 has a control for LFE GAIN that is separate from BASS GAIN. This allows you to have the S4/8 augment your surround speakers as well as deliver LFE around the room at the same time without conflicts. The usual way to control the level of the LFE output is to set the LFE gain to 6 – the twelve o’clock position – and then use the home theatre processor’s level control to dial in the level. However, different locations in the room may have different room gain in the bass frequencies. The LFE gain control allows you to tune each subwoofer for optimum balance.

LFE Output

Along with the LFE input, the S4/8 has the unique capability of providing an LFE output. This buffered output can be used to daisy- chain the LFE signal from the S4/8 to the LFE inputs of other Genesis subwoofers including other S4/8’s, S2/12t’s or G928’s. Thus, it is possible to channel the LFE signal from your home theatre processor to one S4/8, and then from that to another, and another, and another!

S4/8 Owners Manual Ver 0.1

S4/8 specifications

Genesis Advanced Technologies has established itself as a frontrunner in high-performance audio equipment, and the S4/8 loudspeaker exemplifies this commitment to excellence. The S4/8 is a remarkable fusion of innovative technology and sophisticated design, aimed at delivering an unparalleled listening experience.

At the core of the S4/8 is its unique driver configuration, which incorporates advanced materials and engineering techniques. Each speaker features a proprietary ribbon tweeter that offers exceptional high-frequency response, ensuring clarity and detail across the most nuanced audio passages. Coupled with this, the midrange drivers employ advanced composite materials to minimize distortion while providing a rich, warm sound that brings life to vocals and instruments alike.

A standout feature of the S4/8 is its cabinet design, crafted from high-density MDF. This construction choice dramatically reduces resonance, allowing the speakers to produce a cleaner sound free from unwanted coloration. The enclosure is meticulously designed to optimize internal airflow, enhancing the bass response while maintaining tight control over the lower frequencies.

In terms of technology, Genesis Advanced Technologies has integrated a sophisticated crossover network within the S4/8, allowing for precise frequency distribution among the drivers. This results in a seamless integration of sound across all frequencies, ensuring that listeners enjoy a coherent soundstage. Additionally, the S4/8 supports bi-wiring and bi-amping configurations, giving audiophiles the flexibility to customize their setup for the best performance.

The aesthetic appeal of the S4/8 cannot be overlooked. Available in a variety of finishes, including real wood veneers, these speakers not only perform beautifully but also complement any audio setup visually. The elegant design, coupled with a robust build quality, makes the S4/8 a true statement piece.

Furthermore, the S4/8 is designed with user functionality in mind, featuring multiple input options and a straightforward setup process. This speaker is compatible with a wide range of amplification sources, allowing audiophiles to tailor their sound preferences to suit their individual tastes.

In conclusion, the Genesis Advanced Technologies S4/8 is a masterclass in audio engineering, boasting advanced features like a proprietary ribbon tweeter, high-density MDF cabinet, and bi-wiring capabilities. Whether for casual listening or serious audiophile applications, the S4/8 delivers an immersive, high-fidelity sound experience that is hard to match.