Mounting, Surface mounting | Faria Instruments GPS100 specs

Fill with silicon

2 Choosing a suitable location for the antenna

Mount the antenna with a good view of the sky and horizon. The view should not be blocked by large parts of the superstructure.

The unit can be under glass, perspex, ﬁbreglass or fabric, but not under metal or wood.

Mount the antenna away from any source of electrical signals or noise. Do not mount the antenna within 3 m (10 ft) of a radio transmitter antenna or within 0.5 m (20") of the plane of a radar antenna.

Do not ﬁt the antenna too high, such as up a

mast, or boat rocking will cause errors in speed and bearing.

Do not mount the antenna where it can be used as a hand hold, where it will interfere with the operation of the boat or where it might be submerged.

Mount the antenna within the connection range of the cable in it's ﬁnal secured position, keeping the cable away from sources of electrical signals or noise and ensuring the cable is not pinched or crushed.

3 Mounting

There are two mounting options:

Surface mounted

Pole mounted

3-1 Surface mounting

Select a suitable location which allows access for afﬁxing nuts and has a suitable mounting surface. Avoid high trafﬁc areas where the antenna may be a tripping hazard.

Ensure that any holes made are in a safe position and will not weaken the boat’s structure. If in doubt,

consult a qualiﬁed boat builder.

Gasket

1.Clean the surface where the antenna will be mounted.

2.Peel the back off one side of the gasket and stick the gasket in the ﬁnal mounting position.

Ensure that the channel is ﬁlled with silicon to provide a seal when gasket is in place.

Cable

3.Using the gasket as a template, drill four 4 mm (5/32") holes.

4.The cable may

either pass through the surface the antenna is mounted on, or exit the side of the antenna:

4A For GPS 100 if passing cable through the surface, drill an 18 mm (23/32") hole for the connector.

4B If exiting the side of the antenna, remove three plastic tabs, then seal cable into place with silicon.

5.Attach the four threaded pins to the antenna.

6.Peel the plastic off the gasket.

7.Place antenna in ﬁnal position.

8.Attach the four nuts to the threaded rod. Do not overtighten.

9.Attach to instrument, then secure the cable at regular intervals.

GPS100 specifications

The Faria Instruments GPS100 is an advanced GPS instrument designed specifically for marine applications, providing boaters with vital navigational information and features that enhance both safety and performance on the water. With precision engineering and user-centric design, the GPS100 delivers reliable functionality that navigators depend on.

One of the standout features of the GPS100 is its high-sensitivity GPS receiver. This technology ensures accurate positioning, even in challenging environments where other units may struggle. The receiver can lock onto satellite signals quickly, providing real-time tracking and navigation data with minimal delay.

The GPS100’s high-resolution display is another notable characteristic. It features an anti-glare screen, which is crucial for visibility under bright sunlight conditions, allowing users to read essential information at a glance. The interface is intuitive, simplifying access to key navigational functions. This user-friendly design is complemented by customizable screens, enabling users to tailor the display to their specific needs.

The device supports multiple navigation formats, including NMEA 0183 and NMEA 2000, making it compatible with various marine electronics. This flexibility allows boaters to integrate the GPS100 seamlessly into their existing systems, ensuring a cohesive and comprehensive navigation experience.

Another significant advantage of the GPS100 is its data logging capability. The unit can store key navigational data and track routes, enabling users to review past journeys and adjust future routes based on previous experiences. This feature is particularly valuable for fishing, sailing, or cruising, as it helps boaters remember successful locations and strategies.

The Faria Instruments GPS100 is also designed with durability in mind. It is constructed to withstand the harsh marine environment, with a waterproof rating that ensures reliable operation even in wet conditions. This rugged design means that enthusiasts can trust the GPS100 to perform in a variety of weather scenarios.

In addition to its navigational prowess, the GPS100 offers features such as waypoint management, allowing users to mark and easily return to specific locations of interest. Support for multiple languages also makes the GPS100 an accessible choice for a global audience.

In summary, the Faria Instruments GPS100 is a robust, versatile GPS device tailored for the marine sector. With its high-sensitivity receiver, high-resolution display, compatibility with existing systems, and durable construction, it stands out as an essential tool for both amateur and seasoned boaters alike, enhancing safety and navigation on the water.