Power Switch, AC Input Connector, Mode Switch

LX Power Amplifiers

Basic Operation

1. Power Switch

Disconnects power to the AC Input Connector. Set this switch to off when making or breaking connections to the amplifier, or when changing the setting of the MODE switch.

2. AC Input Connector

The AC input connector provides power to the unit with the supplied power cord (3 conductor, 14AWG). Do not use an extension cord. For optimal performance, use an isolated power receptacle with adequate current (15 or 20 amps). Line voltages ≥10% above the specified voltage may damage the amplifier. Line voltages ≤10% below the specified voltage may cause the amplifier to enter a protection mode, indicated by the red standby LED flashing.

3. INPUT 1 to 7 (LX-7) or 1 to 5 (LX-5)

Provide audio input for the speakers connected to the corresponding audio outputs. When using the unbalanced (RCA) audio inputs, make sure the UNBAL/BAL switch located to the left of each XLR connector is set to UNBAL. When using the balanced (XLR or 1/4-inch tip/ring/sleeve) audio inputs, make sure the UNBAL/BAL switch is set to BAL. The illustrations below show the appropriate cable ends for 1/4-inch T/R/S and XLR connectors.

Tip Sleeve

Tip = Positive

Ring = Negative

Sleeve = Ground

Ring

2 = Positive

Male

Cable End

3 = Negative

1 = Ground

4. OUTPUT 1 to 7 (LX-7) or 1 to 5 (LX-5)

Provide audio output for the speakers. OUTPUT connectors can accept bare speaker wires, banana plug connectors, or certain spade connectors. When using bare speaker wires, loosen the connector, insert the wire into the top of the receptacle, then tighten the connector. The same procedure should be used for spade connectors. Banana plugs should be inserted into the outward-facing receptacle.

Use heavy gauge speaker cable to ensure low-impedance connections between the amplifier and the speakers. Observe correct speaker polarity.

WARNING Do not connect the OUTPUTs of one channel to the OUTPUTs of other channels or to other amplifiers.

Note:

If the rear panel MODE switch is set to INDIVIDUAL, speakers must have impedance ratings of 2Ω or higher. If set to (BRIDGED), speakers must have impedance ratings of 4Ω or higher. Using speakers with lower than recommended impedance ratings might activate protection modes.

5. MODE Switch

Configures channels 1 and 2 or 3 and 4 for INDIVIDUAL or (BRIDGED) operation. When set to INDIVIDUAL, all INPUTs and OUTPUTs function as separate channels. When set to (BRIDGED), the selected INPUTs and OUTPUTs are combined to create a single high-power channel.

. . . continued on page 2-7

2-5

070-14876 specifications

Lexicon 070-14876 is an innovative audio processor designed for both professional and consumer audio applications. This device is renowned for its high-quality sound processing capabilities, making it a favorite among musicians, sound engineers, and audiophiles. Packed with advanced technologies, the Lexicon 070-14876 enhances audio performance while providing an intuitive user experience.

One of the standout features of the Lexicon 070-14876 is its superior reverb and effects processing. With Lexicon's renowned algorithm, users can access a wide range of reverb types, from lush halls to tight rooms, allowing for creative flexibility. This versatility enables artists to shape their audio spaces and enrich their soundscapes, making it an essential tool in both studio and live settings.

The device also includes multiple I/O options, catering to various connectivity needs. With balanced XLR inputs and outputs, along with digital connections such as AES/EBU, S/PDIF, and ADAT, the Lexicon 070-14876 is capable of integrating seamlessly into any audio setup. This broad compatibility ensures that it can be utilized with other studio equipment, digital audio workstations, and live sound systems without any issues.

Another significant characteristic of the Lexicon 070-14876 is its user-friendly interface. The built-in LCD display and clearly labeled knobs provide an intuitive way to navigate through the device's extensive features. Users can easily tweak parameters and store presets, streamlining the creative process without the need for complicated menus or lengthy setups.

In addition to its robust processing capabilities, the Lexicon 070-14876 is built with durability in mind. Its rugged chassis ensures that it can withstand the rigors of touring and live performances while maintaining consistent performance. This reliability makes it a preferred choice for professionals who rely on their equipment to deliver top-notch sound in high-pressure environments.

Finally, the Lexicon 070-14876 is capable of real-time audio processing, which is crucial for live performances where delay or latency can hinder the experience. By providing instant feedback and adjustments, it allows performers to deliver their best while ensuring an immersive experience for the audience.

In summary, the Lexicon 070-14876 stands out in the realm of audio processing with its exceptional sound quality, versatile connectivity, user-friendly interface, rugged construction, and real-time performance capabilities. Whether in the studio or on stage, this device elevates audio production and is an invaluable asset for anyone serious about sound.