Meade TS33F-M user manual Specifications, FCC Statement

Page 8

SPECIFICATIONS

Remote Temperature

Proposed operating range with alkaline batteries: -4°F to 122°F(-20°C to 50°C)

Proposed operating range with lithium batteries: -40°F to 122°F(-40°C to 50°C)

Temperature resolution: 0.1°C/0.2°F

LCD display of registered temperature and humidity

Remote Humidity

Proposed operating range: 25% to 95%

Humidity Resolution: 1% Low battery indicator

Removable temperature probe with 10 feet cable RF Transmission Frequency: 433 MHz

Maximum number of transmission channels: three (3)

RF transmission range: Maximum 100 feet (30 meters) Temperature and humidity transmission cycle: approximately 45 seconds

Wall Mount or Desktop option

Power

2 AA size (UM-3) 1.5V batteries (not included)

Dimensions

2.37(L) x 4(H) x 1(D) inch

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment, installed and used in accordance with the instructions, may cause harmful interference to radio communications.

8

Image 8
Contents Temperature & Humidity Sensor with Probe Table of Contents Introduction Battery Compartment External Removable Temperature Probe Before YOU BeginBattery Installation Precautions Transmission CollisionSpecifications FCC StatementDeclaration of Conformity Battery Safety Instructions Standard Warranty Information Meade Instruments Corp