Meade TE653ELW-M user manual Changing Pressure and Altitude Units

Page 18

CHANGING PRESSURE AND ALTITUDE UNITS

•Press MODE as needed, until “LOCAL” pressure is displayed.

•Press and hold HISTORY, until the pressure unit is flashing.

•Change local or sea level pressure units by pressing the UP (? ) or DOWN (? ) buttons to select the pressure units. Choose from: inHg, hPa/mBar or mmHg.

•Press HISTORY to confirm your selection.

•Press MODE button until the local altitude value will be displayed.

•Press and hold HISTORY until the altitude unit is flashing.

•Select the ALTITUDE unit:, meters or feet, by pressing UP (? ) or DOWN (? ) buttons.

•Press HISTORY to confirm your selection.

VIEWING SEA LEVEL PRESSURE HISTORY

•In pressure mode, press HISTORY button entering the sea level pressure display.

•When the SEA LEVEL is displayed, press HISTORY repeatedly viewing the sea level pressure history for the past 24 hours in 1 hour intervals.

•If no buttons are pressed for 5 seconds, the unit will automatically return to the default Pressure and Weather Forecast Mode.

VIEWING PRESSURE, TEMPERATURE AND HUMIDITY CHARTS

The bar chart in Pressure Window can be configured to display a historical data for the sea level pressure and temperature or humidity for channel 1.

After selecting the Pressure Window, press and hold ALARM button to toggle the bar chart between the sea level pressure with a word “PRESSURE” displayed at the right bottom corner of the chart, temperature with a thermometer icon and “CH1” and a humidity with “RH” icon and “CH1”.

MOON PHASE ICONS

New

Waning

First

Waxing

Full

Waning

Last

Waning

Moon

Crescent

Quarter

Gibbous

Moon

Gibbous

Quarter

Crescent

TEMPERATURE/ HUMIDITY WINDOW

The main unit supports up to 3 remote sensors, corresponding to a separate channel of the temperature and relative humidity display. The temperature can be displayed in Celsius (ºC) or Fahrenheit (ºF).

The main unit carries the temperature and humidity sensor and uses this data to calculate an indoors comfort level - Wet, Comfort or Dry.

A temperature alert function is available for all channels. It can be programmed to sound if the channel temperature exceeds or falls below the pre-set upper and lower limits.

10

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TE653ELW-M Introduction Installation Before YOU BeginBattery Compartment Operation PlacementFeatures TimeFront Rear Alarm button Table Stand Battery CompartmentBattery Installation Getting Started Weather ForecastSelect Pressure Units of Measure Setting Initial Pressure ParametersPressure Operation Viewing Pressure and Altitude InformationTEMPERATURE/ Humidity Window Viewing PRESSURE, Temperature and Humidity ChartsMoon Phase Icons Changing Pressure and Altitude UnitsSetting Temperature Alarm Viewing Remote Channel Temperature and HumidityProgramming Temperature in Celsius or Fahrenheit Activating or Deactivating Temperature AlarmsComfort Level Indication Resetting Temperature MemoriesViewing MAX/MIN and Minimum Readinngs COMTime Zone Manual SettingsIcon Time and CalenderSetting the ICE Warning Alarm PRE-AL Clock AlarmsSetting the Weekday W and Single DAY S Alarms ACTIVATING/ Deactivating AlarmsTroubleshooting PrecautionsBattery Installation Setting Initial Pressure Parameters Changing Pressure and Altitude Units Remote Sensors Status Viewing MAX/MIN and Minimum Readinngs Time and Calender Clock Alarms Issue Symptom Solution

TE653ELW-M specifications

The Meade TE653ELW-M is a versatile and innovative telescope designed for both amateur and experienced astronomers. This telescope combines advanced optics, user-friendly technology, and robust features, making it a popular choice among stargazers.

One of the key features of the TE653ELW-M is its impressive optics system. It is equipped with a 65mm aperture that allows for bright and detailed views of celestial objects. With a focal length of 700mm, this telescope delivers clear images of planets, nebulae, and star clusters. The multi-coated lenses enhance light transmission, ensuring that users experience crisp and vivid visuals.

The TE653ELW-M utilizes a refractor design, which is known for its low maintenance and ease of use. This type of telescope provides a stable image with minimal aberrations, making it ideal for both terrestrial and astronomical observations. Users will appreciate the telescope's ease of setup, allowing them to embark on their stargazing adventures with minimal hassle.

A standout feature of the Meade TE653ELW-M is its integrated electronic features. The telescope comes equipped with a built-in motorized mount that can be controlled using a smartphone or tablet. This GoTo technology enables users to locate and track celestial objects effortlessly. Whether observing the Moon, planets, or distant galaxies, the TE653ELW-M allows for an immersive experience.

For those who enjoy astrophotography, the TE653ELW-M offers user-friendly compatibility with various cameras. The telescope includes a universal camera adapter, enabling users to capture stunning images of their favorite celestial targets. Its sturdy construction ensures stability during long exposure photography, providing clear and detailed results.

In terms of portability, the TE653ELW-M is designed with convenience in mind. Weighing just over 4 pounds, it is lightweight and easy to transport. The telescope comes with a collapsible design, making it compact for storage and travel. Whether heading to a local park for a night of stargazing or venturing out to more remote locations, this telescope is an excellent companion.

In summary, the Meade TE653ELW-M combines quality optics, advanced technology, and portability, making it an excellent choice for anyone looking to explore the night sky. Its user-friendly features and solid optical performance ensure that beginners and seasoned astronomers alike will have enjoyable and rewarding astronomical experiences. With the TE653ELW-M, the wonders of the universe are just a glance away.
Top Page Image Contents