Midland Radio 77-255ESP manual Tuning your antenna

Page 6

Warning: Never operate your CB radio without attaching an antenna or with a broken antenna cable. This can result in damage to transmitter circuitry.

Tuning your antenna.

Some antennas are factory tuned. However, performance can usually be improved by slightly lengthening or shortening its length, using a Standing Wave Radio (SWR) meter. For the exact procedures to be used refer to the antenna manufacturer’s installation manual.

You can buy an SWR meter separately or have your antenna checked by your Midland CB Dealer’s service department or a two-way comm shop.

77-255ESP

FUNCTION AND LOCATION OF CONTROLS

6

Image 6
Contents Page How to install your Midland mobile CB Where to locate your CB transceiver Power wiring negative ground onlyMechanical mounting Installation of microphone hanger Mounting the main unitWhere you locate your antenna does make a difference Antenna installationTuning your antenna 77-255ESPFront Panel Controls Back Panel HOW to Operate Your Transceiver for CB USE Technical Specifications General Midland