Snapper R196019B important safety instructions Problem Probable Cause, Corrective Action

Page 14

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Engine Will Not Start

1.

Fuel tank empty.

Using Recoil Starter

2.

Engine needs choking or priming.

 

 

 

 

3.

Spark plug wire disconnected.

 

4.

Spark plug faulty.

Engine Stalls or Stops

1.

Blade control is released or is not being held securely

After Running

 

against handle.

2.Fuel tank empty.

3.Engine air pre-cleaner and or air cleaner dirty.

4.Spark plug defective or gap set improperly.

5.Water, debris or stale fuel in fuel system. Engine Loses Power 1. Engine air pre-cleaner or air cleaner dirty

2.Spark plug faulty.

3.Water, debris or stale fuel in fuel system.

Excessive Vibration 1. Damaged, out of balance or bent mower blade.

2.Loose blade components.

3.Loose or missing air lift (if equipped).

Cutting Grass 1. Cutting height too low or high.

Improperly

2. Engine speed too slow.

3.Forward ground speed too fast.

4.Terraced cut, side to side.

5.Excessive deck pitch, front to rear.

6.Cutting blade dull or damaged.

Poor Grass Discharge 1. Engine speed too slow.

 

2.

Grass is wet.

 

3.

Excessively worn or damaged blade.

 

4.

Build up of grass clippings and debris under deck.

 

5.

Improper blade installed on deck.

 

6.

Blade installed improperly on deck.

Oil Leaking

1. Leaking engine case.

CORRECTIVE ACTION

1.Fill fuel tank with fresh fuel.

2.Choke/Prime. Check Engine Manual for instruction.

3.Place spark plug wire onto spark plug.

4.Replace with new spark plug.

1.Blade control should be held securely against handle at all times during operation of mower.

2.Fill with fuel to proper level.

3.Clean free of all debris.

4.Service spark plug.

5.Drain and clean fuel system.

1.Clean or replace filters.

2.Service spark plug.

3.Drain and clean fuel system.

1.Service mower blade.

2.Service and tighten loose parts.

3.Replace air lifts. Tighten to proper torque.

1.Adjust cutting height.

2.Contact authorized SNAPPER Dealer.

3.Walk at slower pace.

4.Adjust height of cut with height adjust bushings.

5.Adjust height of cut with height adjust bushings.

6.Sharpen cutting edges or replace blade.

1.Contact authorized SNAPPER Dealer.

2.Mow when grass is dry.

3.Service mower blade.

4.Clean deck.

5.Install proper SNAPPER blade.

6.Install blade properly.

1.Contact authorized SNAPPER dealer.

2.Check and tighten drain plug.

3.Make sure dipstick or oil filler cap is securely in place.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Steel Deck Walk Mowers Series Preparation Protection for ChildrenSlope Operation Safe Handling of GasolineMaintenance and Storage OperationUsage Statement Table of Contents Introduction FamiliarizationPrimer Bulb NomenclatureStarting & Operation 2.2.1. Engine & Blade Operating InstructionsPRE-START Check List Handle Height Adjustment StoppingRecycling Operation Cutting Height AdjustmentRecycling Cover REMOVAL/INSTALLATION Discharge Deflector Installation Check Mower Blade MaintenanceService After First 5 Hours 3.2.1. Change Engine OIL Service Annually Storage ProcedureBlade Sharpening Adjustments & RepairMower Blade Replacement Standard Blade Wear Limit Problem Probable Cause Corrective ActionUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Steel Deck Walk Behind Mowers Series

R196019B specifications

The Snapper R196019B is a versatile and efficient lawn mower designed to meet the needs of both residential and commercial users. This mower stands out in the crowded landscape of outdoor power equipment due to its combination of innovative features, robust design, and user-friendly functionalities.

At the heart of the Snapper R196019B is a reliable 196cc engine, which delivers powerful performance while ensuring optimal efficiency. This four-stroke engine is known for its durability and consistent power, making it capable of tackling various lawn conditions. Its self-propulsion system allows users to navigate inclines and uneven terrain with ease, as it drives the mower forward automatically, requiring less effort from the user.

One of the notable features of the Snapper R196019B is its versatile cutting system. It offers three-in-one functionality, allowing users to choose from bagging, mulching, or side discharge options. This adaptability allows for flexibility based on personal preferences or specific lawn care needs. The mulching feature, in particular, is advantageous, as it finely chops grass clippings and returns them to the lawn, providing essential nutrients that promote healthy grass growth.

The mower is equipped with a sturdy 21-inch steel cutting deck, which ensures a precise and even cut while enhancing durability. The adjustable cutting height feature offers multiple positions, allowing users to customize grass length based on seasonal requirements or aesthetic preferences.

In terms of design, the Snapper R196019B boasts a compact, lightweight structure, which makes it easy to maneuver and store. The ergonomic handle provides comfort during operation and can be adjusted to accommodate different user heights, promoting ease of use.

Safety features are a priority in the Snapper R196019B, with an operator presence control that ensures the engine stops when the user releases the handle. This precaution minimizes the risk of accidents and enhances overall safety while mowing.

The Snapper R196019B is a perfect choice for homeowners looking for a reliable, efficient lawn mower that adapts to various mowing tasks. Its powerful engine, versatile cutting options, and thoughtful design make it a worthy investment for maintaining a beautiful lawn. Whether tackling thick grass or navigating around obstacles, this mower provides a blend of performance and convenience that meets the demands of modern lawn care.
Top Page Image Contents