Esoteric AI-10 manual Analog audio input terminals Line, Digital audio input terminals Digital

Page 7

AAnalog audio input terminals [LINE IN]

Used for the input of analog 2-channel audio signals. Connect these terminals to a Super Audio CD player (SA- 10), cassette tape deck, tuner, etc. using commercially available XLR or RCA audio cables.

Make sure to connect:

white plug q white jack (L: left channel)

red plug q red jack (R: right channel)

LINE4/PHONO terminals

In addition to a cassette tape deck or tuner, you can also connect a turntable to the LINE4/PHONO terminals. Connect the ground lead of the turntable to the SIGNAL GND terminal of the AI-10. (But if low frequency noises are heard, it might be better not to connect the ground lead.)

The cartridge of the turntable should be Moving Magnet or similar.

LINE/PHONO switch

Select PHONO when a turntable is connected to the LINE4/PHONO terminals. Select LINE4 when a cassette tape deck, tuner, etc. is connected to the LINE4/PHONO terminals.

BDigital audio input terminals [DIGITAL IN]

Used for the input of digital audio signals from CD, DVD, etc.

The unit may be connected to digital audio source units such as CD players, DVD players, etc.

Use commercially available cables.

COAXIAL: RCA (pin) digital audio cable

OPTICAL: optical digital audio cable (TOS)

<The optical terminal is covered by a shutter. Make sure that the cable is firmly inserted, but do not force the cable when connecting it or removing it, in order not to cause damage to the unit.

<The COAXIAL and OPTICAL terminals cannot transmit the digital audio from Super Audio CDs.

<The AI-10 isn’t equipped with Dolby Digital/DTS/MPEG decoders. The digital output setting of the connected DVD player must be “PCM”.

CSIGNAL GND connection

Use a commercially available PVC-covered cord to connect the signal ground terminal on the unit to the player’s signal ground.

<Note that this is NOT an electrical safety ground (earth).

<When a turntable is connected, make sure to connect the ground lead of the turntable.

D WORD SYNC output terminal

This terminal sends out a sync signal (word).

 

 

Connect this to the WORD IN terminal of a digital device

ENGLISH

digital cable (75Ω impedance).

such as the SA-10, UZ-1, etc.

 

For connection, use a commercially available BNC coaxial

 

 

 

E Power cord receptacle

After all other connections have been made, insert the supplied AC power cord into this receptacle, then connect the other end of the power cord into the wall socket.

<Ensure that your AC voltage corresponds to the voltage marked on the rear panel of the unit. Consult a qualified electrician if you are in doubt.

<Use only the supplied Esoteric power cord. Use of other power cords may result in fire or electric shock. Unplug the power cord when you are not going to use the unit for an extended period of time.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Digital Integrated Amplifier Important Safety Instructions Contents What’s in the box MaintenanceBefore Use Speaker ConnectionFor European customers Connection using speaker cables with spades or bare wireConnection using speaker cables with banana plugs When your speaker cable has bare wire at the endCD player, DVD player, tuner, etc ConnectionCD player, DVD player, etc Super Audio CD player SA-10 etcDigital audio input terminals Digital Signal GND connectionPower cord receptacle Analog audio input terminals LineLFE Reserved slot for i.LINK Audio terminalsBattery Replacement Remote Control UnitRestoring factory settings How to insert the batteriesIdentifying the Parts Remote Control UnitFront Panel Front Panel Remote Control UnitDisplay Turn the connected components off Basic OperationTo turn the unit off standby Select an input by turning the Input knobOFF MutingDisplay Dimming Word SyncPress and hold the Setup button for more than 2 seconds Gain Setting for Analog Audio InputTurn the Input knob to change the Gain setting Turn the Input knob to change the setting Name and Skip Setting of the Input KnobExample Normal display Settings for Word Sync, Volume and i.LINKSvol starting volume Wout Word sync output frequencyCH Channel IRC i.LINK remote control functionMastr Slave Data transfer rate How to connect multiple i.LINK-capable devicesLink Ieee Copyright protection system DtcpTroubleshooting Specifications Lisez ceci avant utilisation SommaireAvant utilisation Contenu de l’emballageTeac Esoteric Company

AI-10 specifications

Esoteric AI-10 represents a significant evolution in the field of artificial intelligence, combining advanced machine learning techniques with a myriad of innovative features designed for both personal and professional use. At its core, AI-10 harnesses the power of deep learning, enabling it to analyze vast datasets and derive meaningful insights at an unprecedented speed. This makes it invaluable in applications ranging from predictive analytics to natural language processing.

One of the standout characteristics of Esoteric AI-10 is its capacity for contextual understanding. The AI-10 is built on a state-of-the-art transformer architecture, allowing it to comprehend the nuances of human language with striking accuracy. This enables it to engage in more meaningful and context-aware conversations, making it a powerful tool for customer service, content creation, and educational platforms.

Another critical feature of AI-10 is its adaptability. The system employs transfer learning techniques, enabling it to apply knowledge acquired from one domain to solve problems in another. This not only enhances its versatility but also reduces the required training time, allowing organizations to implement AI solutions more rapidly.

Esoteric AI-10 utilizes cutting-edge technologies such as reinforcement learning, which allows it to improve its performance over time through trial and error. This self-improving capability significantly elevates its effectiveness in real-world applications, as it learns from user interactions and environmental feedback.

Moreover, AI-10's architecture ensures efficient resource management. It is designed to optimize computational power, making it accessible for businesses of all sizes, from startups to enterprise-level organizations. This efficiency also extends to energy consumption, aligning with the growing emphasis on sustainable technology.

Security and ethical considerations are also paramount in the design of AI-10. It incorporates advanced data protection protocols and follows strict ethical guidelines to ensure responsible usage. This includes transparency in decision-making processes, which builds trust between users and the AI system.

In summary, Esoteric AI-10 is a powerful and flexible artificial intelligence solution characterized by its contextual understanding, adaptability, resource efficiency, and commitment to ethical principles. With its advanced technologies, it stands ready to transform various sectors by providing intelligent, efficient, and responsible AI-driven solutions.
Top Page Image Contents