Section 4 - ADJUSTMENT & REPAIR
WARNING
DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.
4.4.8.DECK BELT REMOVAL & REPLACEMENT 42" Deck Drive Belt
1.Place tractor on a firm level surface.
2.Turn engine "OFF". Remove key.
3.Remove mower deck. Refer to Section “DECK REMOVAL”.
4.Remove deck idler tension spring. Loosen bolts that secure the end of the spindle pulley covers and rotate cover around out of the way. See Figure 4.32 & Figure
TENSION IDLER | SPRING |
REMOVE SPRING FROM
TENSION IDLER
FIGURE 4.32
5.Remove old belt.
6.Replace with new belt.
7.Reinstall both pulley covers.
8.Reinstall mower deck to tractor.
PULLEY
COVER
ROTATE PULLEY
COVER OUT OF
THE WAY
FIGURE 4.33
9.Adjust idler pulley belt guide if necessary to obtain 1/16" clearance between belt and belt guide. See Figure 4.34.
|
|
|
| 1/16” CLEARANCE | ||||
|
|
|
|
| (TYPICAL) | |||
|
|
|
|
| BELT |
|
| |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TENSION |
| |
STATIONARY |
|
|
|
|
|
| ||
IDLER |
|
|
|
|
| IDLER |
| |
|
|
|
|
|
| |||
|
|
|
|
| ||||
|
| BELT |
|
|
| |||
|
| GUIDE |
|
|
| |||
|
|
|
|
|
|
|
|
|
SPINDLE PULLEYS
FIGURE 4.34
28