Snapper FB13250BS, GM2515KAW, GM2513H manual Safety Rules & Information, Safety Decals

Page 5

Safety Rules & Information

SERVICE AND MAINTENANCE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

a)Use only an approved container.

b)Never remove gas cap or add fuel with the engine running. Allow engine to cool before refu- eling. Do not smoke.

c)Never refuel the unit indoors.

If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.

Replace all fuel tank caps and fuel container caps securely.

Never fill containers inside a vehicle or on a truck bed with a plastic bed liner. Always place containers on the ground away from your vehicle before filling.

Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possi- ble, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dis- penser nozzle.

Keep nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is com- plete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immedi- ately.

Maintain or replace safety and instruction labels as necessary.

Never run a unit in an enclosed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly and make necessary repairs if they are not functioning properly.

Keep unit free of grass, leaves, or other debris build- up. Clean up oil or fuel spillage.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running unless specified otherwise in the engine man- ufacturer's manual.

Do not remove the fuel filter when the engine is hot as spilled gasoline may ignite. Do not spread fuel line clamps further than necessary. Ensure clamps grip hoses firmly over the filter after installation.

Do not use gasoline containing METHANOL, gasohol containing more than 10% ETHANOL, gasoline addi- tives, or white gas because engine/fuel system dam- age could result.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check blade brake operation frequently. Adjust and service as required.

Use only factory authorized replacement parts when making repairs.

Always comply with factory specifications on all set- tings and adjustments.

Only authorized service locations should be utilized for major service and repair requirements.

Never attempt to make major repairs on this unit unless you have been properly trained. Improper ser- vice procedures can result in hazardous operation, equipment damage and voiding of manufacturer's warranty.

Do not change engine governor settings or over- speed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.

Disengage drive attachments, stop the engine, remove the key, and disconnect the spark plug wire(s) before: clearing attachment blockages and chutes, performing service work, striking an object, or if the unit vibrates abnormally. After striking an object, inspect the machine for damage and make repairs before restarting and operating the equipment.

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! All of the safety decals below are on your mower.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

4

Image 5
Contents Mfg. No Model No Description OPERATOR’S ManualTable of Contents General Operation Safe Operation Practices for WALK-BEHIND MowersService Safety Rules and InformationSlope Operation ChildrenSafety Decals Safety Rules & InformationDecal Engine Throttle Control Decal WarningDecal Danger Dismemberment Decal Danger Flying ObjectsControl Functions Features & ControlsEngaging the Transmission Starting the EngineBefore Starting Engine To Start EngineTo Propel Unit In Reverse Operating the MowerTo Propel Unit Forward To Disengage Cutting Blade ENGAGING/DISENGAGING the Cutting BladeStorage To Adjust Cutting HeightService Interval Every 25 Hours Regular MaintenanceLubrication Lubricate Rear Axle ShaftsBattery Service Regular MaintenanceCleaning the Battery and Cables 9HP Models Cleaning the Battery and Cables All Models Except 9HPRemoving the Blade Servicing the Mower BladesTroubleshooting Troubleshooting Adjustment, & ServiceTroubleshooting Troubleshooting, Adjustment & ServiceTravel Control Adjustment Troubleshooting, Adjustment, & ServiceSerial Number Serial Number 012003001-UpShut off engine before attempting this adjustment procedure Blade Clutch AdjustmentMower Belt Adjustment Blade Brake AdjustmentFor S/N 071601076 up Traction Drive Belt AdjustmentFor S/N 0 Mower Belt Replacement Troubleshooting, Adjustment & ServiceReplacement Parts SpecificationsMaintenance Items Technical Manuals