Preparation Operation | Snapper ELT145H33DBV, ELT125G33DB specs

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION		OPERATION
(Continued From Previous Page)		(Continued From Previous Column)
4.	Handle fuel with extra care. Fuels are flammable	12.	Mow only in daylight or with good artificial light.
	and vapors are explosive. Use only an approved	13.	Move joystick (if equipped) SLOWLY to maintain
	fuel container. Never remove fuel cap or add fuel		control during speed and directional changes.
	with engine running. Add fuel outdoors only with	14.	Exercise CAUTION when pulling loads. Limit loads
	engine stopped and cool. Clean spilled fuel from		to those you can safely control and attach loads to
	machine. DO NOT smoke.		hitch plate as specified with SNAPPER attachment
5.	Practice operation of machine with BLADE OFF to		instructions.
	learn controls and develop skills.
6.	Check the area to be mowed and remove all	MAINTENANCE
	objects such as toys, wire, rocks, limbs and other	1.	Never store machine or fuel container inside
	objects that could cause injury if thrown by blade		where fumes may reach an open flame, spark or
	or interfere with mowing.		pilot light such as in a water heater, furnace,
7.	Keep people and pets a safe distance from		clothes dryer or other gas appliance. Allow engine
	machine.		to cool before storing machine in an enclosure.
8.	Check shields, deflectors, switches, blade		Store fuel container out of the reach of children in
	controls and other safety devices frequently for		a well ventilated, unoccupied building.
	proper operation and location.	2.	Keep engine free of grass, leaves or excess grease
9.	Make sure all safety decals are clearly legible.		to reduce fire hazard and engine overheating.
	Replace if damaged.	3.	When draining fuel tank, drain fuel into an
10.	Protect yourself when mowing and wear safety		approved container outdoors and away from open
	glasses, long pants and substantial footwear.		flame.
11.	Know how to STOP blade and engine quickly in	4.	Check brakes frequently; adjust, repair or replace
	preparation for emergencies.		as needed.
12.	Use extra care when loading or unloading the	5.	Keep all bolts, nuts and screws properly tight.
	machine into a trailer or truck.		Check that all cotter pins are in proper position.
13.	Check grass catcher components frequently for	6.	Always provide adequate ventilation when running
	signs of wear or deterioration and replace as		engine indoors. Exhaust gases contain carbon
	needed to prevent injury from thrown objects		monoxide, an odorless and deadly poison.
	going through weak or worn spots.	7.	Disconnect negative (black) cable from battery
OPERATION			before performing maintenance or service.
OPERATION			Cranking engine could cause injury.
1.	Mount and dismount machine from left side.	8.	Never work under machine without safety blocks.
2.	Start engine from operator's seat, if possible.	9.	Service engine and make adjustments only when
	Make sure blade is OFF and parking brake is set.		engine is stopped. Remove spark plug wire(s)
3.	STOP blade, STOP engine, set parking brake and		from spark plug(s) and secure wire(s) away from
	remove key when leaving machine.		spark plug(s).
	remove key when leaving machine.	10.	DO NOT change engine governor speed settings
4.	DO NOT operate machine unless properly seated	10.	DO NOT change engine governor speed settings
4.	DO NOT operate machine unless properly seated		or overspeed engine.
	with feet on feet rests or pedal(s).		or overspeed engine.
	with feet on feet rests or pedal(s).	11.	Lubricate machine at intervals specified in manual
5.	STOP BLADE and ENGINE and make sure blade	11.	Lubricate machine at intervals specified in manual
5.	STOP BLADE and ENGINE and make sure blade		to prevent controls from binding.
	has stopped before removing grass catcher or		to prevent controls from binding.
	has stopped before removing grass catcher or	12.	Mower blades are sharp and can cut. Wrap the
	unclogging mower to prevent loss of fingers or	12.	Mower blades are sharp and can cut. Wrap the
	unclogging mower to prevent loss of fingers or		blades or wear heavy leather gloves and use
	hand.		blades or wear heavy leather gloves and use
	hand.		CAUTION when handling them.
6.	Blade must be OFF except when cutting grass. Set	13. NEVER test for spark by grounding spark plug
	blade in highest position when mowing over		next to spark plug hole; spark plug could ignite
	rough ground.		gas exiting engine.
7.	Keep hands and feet away from rotating blade	14.	Have machine serviced by an authorized
	underneath deck. NEVER place foot on ground		SNAPPER dealer at least once a year and have the
	while BLADE is ON or machine is in motion.	15.	dealer install any new safety devices.
8.	Deflector or entire grass catcher must be in place.	15.	Use only genuine SNAPPER replacement parts to

NEVER point discharge at people, passing cars,	assure that original standards are maintained.
NEVER point discharge at people, passing cars,
windows or doors.

9.Slow down before turning.

10.Watch out for traffic when near or crossing roadways.

11.STOP engine immediately after striking an obstruction. Inspect machine and repair damage before resuming operation.

ELT140H33DBV, ELT125G33DB, ELT145H33DBV specifications

The Snapper ELT145H33DBV, ELT125G33DB, and ELT140H33DBV are remarkable lawn mowers designed for both home gardeners and professional landscapers, featuring a blend of innovation, durability, and ease of use. These models stand out not only for their cutting performance but also for their state-of-the-art technologies that enhance user experience and ensure a well-manicured lawn.

One of the main features of the Snapper ELT145H33DBV is its efficient 145cc engine, which provides ample power for tackling tough grass and uneven terrains. This model boasts a cutting deck width of 33 inches, allowing for wider cuts and reducing mowing time. The rear-wheel drive system enhances maneuverability, making it easy to navigate around flower beds and tight spaces, which is particularly beneficial for residential yards with intricate landscaping.

The ELT125G33DB is powered by a slightly smaller 125cc engine but delivers reliable performance suited for smaller lawns. It features an adjustable cutting height system that offers users a choice between seven different heights, providing versatility for various grass types and seasonal changes. Its compact design makes it easy to store, which is ideal for those with limited garage or shed space.

For users who demand a balance between power and precision, the ELT140H33DBV strikes a perfect chord. With a durable 140cc engine and a robust construction, it promises longevity and efficient operation. This model includes a self-propulsion feature that reduces the effort required by the user, making it an ideal choice for larger properties where extensive mowing sessions are required. Like the ELT145H33DBV, it also has a 33-inch deck, ensuring optimized cutting performance.

All three models incorporate Snapper’s proprietary technologies that enhance their functionalities. For instance, they include a side discharge capability that allows the user to return nutrients back to the lawn, promoting healthier grass. Additionally, they come with easy-start features and ergonomic controls, ensuring that even those with limited experience can operate them efficiently.

In terms of construction, Snapper has utilized high-quality materials that are resistant to rust and corrosion, ensuring that these mowers withstand the elements and maintain their appearance over time. Furthermore, the innovative design of these lawn mowers provides easy access for maintenance, making upkeep simple and hassle-free.

In conclusion, the Snapper ELT145H33DBV, ELT125G33DB, and ELT140H33DBV are standout models that cater to a variety of mowing needs. With advanced features, reliable performance, and user-friendly designs, they continue to set new standards in lawn care equipment.

IMPORTANT SAFETY INSTRUCTIONS

PREPARATION

OPERATION

MAINTENANCE

OPERATION

ELT140H33DBV, ELT125G33DB, ELT145H33DBV specifications